Lirr 2.0 Atc And Acses Test

Does anyone know how to work these? Its been a mystery every since I first got the routes

 

follow the lower speed limit shown in the cab. acknowledge whenever it beeps. i think there’s a manual which goes into greater detail but that’s the crux of it. once you get the hang of it it’ll be a breeze

 

For the ACSES departure test:

1. Set the master controller to min brake, then activate the test.
2. Press Acknowledge, after a few seconds, the track speed indicator will display a 3
3. Acknowledge again, the number changes to 4, and beeping starts
4. Acknowledge again, after a few seconds, the train will dump, and the number changes to 5
5. Move the master controller to max brake, then acknowledge again. Then number will change to 6
6. Move the master controller out of max brake, then back into it, to trigger the auto recharging of the brake pipe
7. When the brake pipe is fully charged, move the controller back to min brake, then repeat steps 2-5 to complete the test

As for the ATC daily test, I still haven't figured that one out myself

 

I know how they work and how to work with them, but its the ACSES departure test and ATC daily test I'm talking about.

 

Finally, I've done it. Thank you kind sir/ma'am