This is now a broken module. At the point where you're asked to coast the train (notch 0) once you've reached 25mph you cannot perform the task because it won't go any lower than notch 1 when you press RB.
Same on PS5 Platform: PS5 / TSW 3 Route: Long Island Railroad Service M7 Introduction Traction: M7 Problem:- Upon reaching required Speed (25mph / 40Km/h) you are asked to coast. Unfortunately the controller will only go as far as Min Power. you cannot goto the coast setting. (tried 3 times in a row. ) Used the Keyboard, the controller and the handle on the train. I couldn't coast which also meant I couldn't use the brake as the controller handle wouldn't go past the min power point. So I couldn't slow down thus spadded in the introduction. Regards Hentis
There's also a second issue. Before the above happens, If you manually pull the brake lever as far as it will go (notch 11 - emergency) and then return it to a different notch the train will emergency stop as it should...but you cannot move the lever to the "max brake" position to reset the brakes and get the train going again. It will only go to 66% braking force.
Yeah I just bought this add-on and I have the same exact issue. This is ridiculous that this is bugged out like this. At first I thought I was moving too fast through the tutorial. Then I thought well maybe don’t use RT and RB and use the actual controls. Literally restarted like 10 times.
If you can hold the master controller with your controller like PC players can permanently press the left mouse button then there is a solution. >>>click me<<< Broken tutorials in full price DLC are very embarrassing, DTG needs to fix this immediately, after all they still make money with LIRR.
yeah, that'll be a NO on them fixing it immediately! there are 4 achievements they STILL need to fix on TSW2 (which will probably still be broken with the transfer to 3) and they've been fubar for a year at least! We'll be lucky if half the problems get fixed by the time 4 comes out!
