ntp 6e37 manchester -leeds loaded oil loco class 47 try to acclerate up the miles platting bank every time i go over notch 2 it starts to slip i reduce the the throttle start to slide down the line brake start up again put in into notch 2 try to go over notch 2 slips again can't get up the incline
it won't let me go to 30% or 60% i get it up to power notch 2 put it in to power notch 3 starts slipping and the dials star jumping up and down
When exactly do the problems start? Are you able to get as far as reaching 15mph and needing to ease off to keep to the speed limit as I mentioned above?
problems start when it goes to 1.7 incline i start to lose speed i put it in to power notch 3 then the dials start jumping up and down i am not able to get to 15 mph
I take it this is in rain or snow.... You'll need a keyboard and use Ctrl x to use the sander.... You'll get it up eventually
same issue here I can't find the sander button on the class 47 either anyone know if it's there/where it is?
I went back and looked into this.... It appears the 47 isn't fitted with a sander.... If you want to get it up the hill you'll have to go into the yellow and floor it from the off.... It can be done if not ideally....
