PC [rsn] Sh04 Shunt Inbound Cement Train Part 1 Signalling Issues

Discussion in 'Troubleshooting' started by raretrack, Feb 13, 2022.

  1. raretrack

    raretrack Well-Known Member

    Joined:
    Dec 31, 2020
    Messages:
    336
    Likes Received:
    285
    Just run this with the 363 via the cement Journey chapter and encountered a couple of issues.

    1) After coupling the 363 to the tank wagons, the departure signal (N104) is black/blank, though showing green on the map. Trusted the map was correct, and luckily it was!
    2) The next signal I came to was showing reduced / expect stop (you can see it in the distance in the screenshot above), but as I got nearer I got a 500hz light. Was below the curve so no emergency brake. But then when actually passing the signal (A475) there was no 1000hz light either!

    (Both unexpected, but a cracking service anyway! Now to part two...)
     
  2. raretrack

    raretrack Well-Known Member

    Joined:
    Dec 31, 2020
    Messages:
    336
    Likes Received:
    285
    Oh, forget to add that N104 was correctly showing double-red at the start of the service.
     
  3. raretrack

    raretrack Well-Known Member

    Joined:
    Dec 31, 2020
    Messages:
    336
    Likes Received:
    285
    UPDATE: Same thing happened in Part Two.
     
  4. Lamplight

    Lamplight Well-Known Member

    Joined:
    Aug 20, 2020
    Messages:
    3,720
    Likes Received:
    6,162
    The picture you tried to attach is not possible to access.
    upload_2022-2-13_19-10-8.png
     

    Attached Files:

    • Helpful Helpful x 1
  5. raretrack

    raretrack Well-Known Member

    Joined:
    Dec 31, 2020
    Messages:
    336
    Likes Received:
    285
    Sorry! Please try again now.
     

Share This Page