So I created a timetable and after one signal on the track, it cant go further so it says its unable to find a path, but there is one. On the Route Map it looks like this: Does anyone know why or how to fix it? For the other signals that are before that one signal it can find a path...
I’ve been really struggling with getting my own signals to work exactly as expected. I understand you have to go into “manage track sections” and near the top select the Fill button to have the routing table rebuilt after adding new signals. Also is the chunky “direction of travel” arrow associated with the signal pointing in the correct direction? Most likely a different problem but one other thing that caused my signals to stick on red was due to not entering Play at a time of day just before the service was due to start in the timetable. I’ve now progressed to sending a service through a signal protecting a crossover, over the two crossover junctions and then off the main line via a turnout. This works if I sit back and let AI drive the train, but if I take over the signal stays on red. I’d love a detailed tutorial on this stuff.
I would suggest you watch the livestream Lukas did where he did explain a bit on how it work's it's not fully complete or anything but it does a great job of getting the signals to basically work
