DESCARRILLO 2 by luisfernandez57 posted Jun 8, 2022 at 11:12 AM DESCARRILO by luisfernandez57 posted Jun 8, 2022 at 11:12 AM Hello: First of all I apologize for my English, I am using the Google translator, I hope you can understand the observed problem. In the service called Edge Hill, railcar shunting at 6:34, with the LMS Jubilee locomotive, after advancing and reversing to go up the ramp, upon reaching the end of the ramp, where there is a detour to a track dead, the locomotive derails. Try to do the activity several times and the same thing always happens at the same point. Observe in the structure of the change something that seems to me not right and may be causing the derailment. I attach photos of the problem and I would like to have some comment on the problem. Many thanks and greetings.
Can confirm problems with this service. I also got derailment at this service. Last try I got a derailment at the position you described but the run before I was on moving forward and got a total unexpected derailment. You should post this in Technical Reports here https://forums.dovetailgames.com/forums/technical-reports.80/ too.
luisfernandez57 just tried the scenario again and this time I finished I guess the key was to stay under 10 mph on the uphill back drive. Also the drive to the railcars I made slow. After this the shunting worked well, You see my speed limits in the graph. Weather was Light rain, so wheel slip occurred more easy.
Hello in_04: I just did what you indicated and it actually worked fine, at least it no longer derails in that place. I'm going to finish the activity and I hope I don't have another problem. Thank you very much for your help. Best regards.
