Steam Service Difficulty Getting Going

Discussion in 'TSW General Discussion' started by AtherianKing, May 31, 2022.

  1. AtherianKing

    AtherianKing Guest

    Service Branch Freight: Clock Face Colliery - Speke Junction 07:30 ish

    anyone tried this service yet, it’s in Journey mode in the rain and I can’t seem to get the 8F moving either I get no movement or wheel slip, tried sander and a few other things so far but no luck

    Edit: seems like when I release the wagons the loco pulls straight away but not when it’s attached to the wagons

    pulling 33
     
    Last edited by a moderator: May 31, 2022
  2. DTG-Chris

    DTG-Chris Staff Member

    Joined:
    Aug 20, 2020
    Messages:
    841
    Likes Received:
    678
    Hey Train Sim 9723

    We have a quite a few useful tips which might help, in the official Spirit of Steam support article here:
    https://dovetailgames.freshdesk.com...es/80001018133-spirit-of-steam-gameplay-guide

    Having check this particular service, it appears the problem may be related to a known issue which is listed on the Spirit Of Steam - What You Need To Know Megathread
    • There are two formations in service mode which have mineral wagons against the locomotive, and bauxite after, which means their brakes won’t come off and the train won’t move. As a workaround, you can remove the brakes manually by pulling each wagon’s cord until a fix is implemented
    Screenshot 2022-05-31 154247.jpg Screenshot 2022-05-31 154315.jpg
     
    Last edited: May 31, 2022
    • Helpful Helpful x 3
    • Like Like x 1
  3. AtherianKing

    AtherianKing Guest


    Much appreciate the help, pulled all the cords and now the service is moving
     
  4. DTG-Chris

    DTG-Chris Staff Member

    Joined:
    Aug 20, 2020
    Messages:
    841
    Likes Received:
    678
    That's great to hear, sorry for the inconvenience! I've added images to my original post to demonstrate exactly where the brake release cord is for anyone else who comes across this thread.
     
    • Like Like x 4
  5. breblimator

    breblimator Guest

    The very good short guide. Thx a lot.
     
  6. breblimator

    breblimator Guest

    Eventually full keyboard layout could be useful too. BR o7
     
  7. AtherianKing

    AtherianKing Guest

    Would like to add I noticed Matt in stream said to hold the vacuum release for 10 seconds

    I didn’t, only pulled it fully then let go for each and my train was able to move after, so I’m not sure if that’s supposed to do that
     
  8. DTG Matt

    DTG Matt Executive Producer Staff Member

    Joined:
    Nov 17, 2016
    Messages:
    3,405
    Likes Received:
    19,333
    If you just pull and let go, you have probably let *most* of the air out, I based my 10 seconds on looking at the internal values and figured it took a good 5-6 seconds to fully empty, so I went with "if you go for 10, you know for sure they're fully released". If what you're doing is working for you though, go for it :)
     
    • Like Like x 2
  9. hairyscotsman40

    hairyscotsman40 Member

    Joined:
    Mar 17, 2018
    Messages:
    52
    Likes Received:
    40
    Anyone suggest best way of NOT relinquishing control of train while doing this? I’ve tried 5 times now to release thes brakes and because you have to hold down A whilst releasing the effing “do you want to relinquish control of the train” message comes up during this process and because you have your finger on A the train moves off!
     
  10. Lamplight

    Lamplight Well-Known Member

    Joined:
    Aug 20, 2020
    Messages:
    4,356
    Likes Received:
    7,555
    Use an external camera to pull on the cords instead of walking up to them.
     
    • Like Like x 2
  11. stujoy

    stujoy Well-Known Member

    Joined:
    Aug 29, 2019
    Messages:
    6,956
    Likes Received:
    18,628
    They should have fixed that ‘defaulting to yes’ pop-up a long time ago. It has long boggled my mind as to why they designed it that way in the first place and how they haven’t addressed it yet. Maybe it doesn’t affect PC as much as console and therefore doesn’t matter to the devs as much as anything that affects the hallowed PC players. If it requires clicking with a mouse on PC then the issue won’t ever come up in the office or for any beta testers, so the magnitude of the issue won’t be ever be realised by DTG, and we can safely assume it will never be fixed.
     
    • Like Like x 2

Share This Page