Today I got into the journey mode part where you get to drive the BR 182. And I noticed some flaws e.g. the second cab not having a working MFD (Ebula display is working though). But the main problem is something the BR 185.2 suffered after its preservation. Here is what I am doing and what happens: 1. Driving the BR 182 on 160 kmh with the AFB set to 160 kmh and being activated. 2. Speedlimit reduction occurs to 110 kmh. 3. I set the AFB to 110 kmh and the loco starts to brake down, the dynamic brake going to 150 KN (its max value) 4. The Loco reaches the target speed of 110 Kmh. I now expect the dynamic brake to reduce itself back to 0. What happens now is that the dynamic brake still is in full use until I am like 30-40 kmh below target speed. It is the same problem (I guess) like the 185.2 had a while ago.
I made the same observation by doing a service with the MRCE BR 182. I don't remember that this was so with the old freight composition DB BR 182 (?!).
I've encountered this issue as well. It takes quite a while to stop braking and start powering again.
