I created a timetable for IOW and, on Monday, this worked fine for 2 hours (then my services all got in the way of each other and jammed up......but that's another story). Yesterday, after doing a couple of minor tweaks, I noticed that my very first service wouldn't now complete its very first load/unload meaning that the whole timetable now didn't work at all. So yesterday consisted of me, basically pulling apart the first service and doing everything from tweaking files to recreating the whole thing from scratch. No success. I then changed the formation and changed the starting point and, at one point, even had it running wrong line to the wrong platform. But on every occasion load/unload wouldn't work. (Sometimes the box would have a commencement time, sometimes not, but either way nothing happened and the doors wouldn't open). Initially I thought it was just this one service but, whilst I was doing a test run I had 'nobbled' service 1 which meant that service 2 could come out of the depot. That ran correctly to its platform but then that one, too, wouldn't do its load/unload. So I am now wondering if all load/unloads aren't working correctly? Has anyone else had anything similar or got any suggestions. (Note that, initially, all the signals, pathing and timings are working correctly. It is the load/unload that never seems to start. (Below is a screenshot of my first service showing that it has got stuck at Ryde St Johns PL2....yet the service has moved on to the Load/Unload box). Thanks, David.
Blooming heck I think I've fixed it I have been trying to drive my first service so I had reset the formation to "parked" so you had to start it up when you got in the cab. Unbeknown to me this then fixed every other service that this formation used to the same settings meaning that the AI drivers couldn't open the doors !!! Changing all 5 of my formations to "Running Stopped" seems to have done the trick Fingers crossed.
