Hello everyone,, Graphics are good - game play leaves some to be desired If you want to open doors on the passenger trains, there is nothing in the tutorials that tell you how to do that. I had to wait to read through a load screen to see that you need to hold down left on the d-pad. Mobdro Lucky Patcher Kodi The good thing about the Amtrak scenarios is that the train is routed on the correct rails automatically. I also find that the max speed indicators that pop-up and you blow by on the ACS-64 don't match the max speed allowed (they are usually greater than the indicated max speed for that signal block). I also find that the ACS-64 seems to get up to speed slower than it appears in real life. I have yet to get it to 90 where allowed as the speed goes to 90 from a 45 back to a 60 to a 15 in in the stretch leading up to Penn Station. The CSX freight scenarios aren't automatically routed... and I have yet to see where the indications are located that tell you which track to align on to meet the next check point. That part is maddening as it requires a lot of back and forth, stopping, getting out to throw a switch and getting back in while keeping the speed under 15 by constantly moderating throttle between Idle and 3 and sometimes throwing some dynamic in there when there is an elevation change....
Some of the trophies are bugged and the platinum is not obtainable. For a lot of PS4 owners, this is a disgrace.
This took me a whole 15 seconds to find via google.... https://storage.googleapis.com/media-dtl-storage/TSW PDFs/TSW PS4 English Digital Manual.pdf ps You can make points changes via the 2D map, you don’t have to get out and walk to them.
I think it is pretty good too, especially because I don't really care about the trophies. I just play to enjoy driving a train, and most just to relax.
You can change points via a number of ways - either by walking up to them, fly over to them with the "free" camera or use the 2D map. On the PS4, press the large touch button in the center of the controller to toggle the map, you can then zoom and pan around it, and if you find switches that have a blue circle with a white arrow they can be clicked to change their direction. You will also find that there is a blue path that comes out of your train and leads to your destination, simply follow that path on the map and make any junction changes required to keep you on that path and then you can drive it in one go, which should make the NEC freight services considerably more enjoyable for you I hope! Hope this helps Matt.
