In the scenario [186 FRET] Nuernberg Rbf - Kehl Yard, I can't get the BR186 to reverse in the yard where you couple to the containers. I uncouple from my consist that I brought from Karlsruhe, then pull forward. When I put it in reverse, it doesn't move and no amps. If I try going forward, nothing.
There is nothing I can see that would stop you from doing the move. Has the Emergency Brakes applied when you stopped? Can you release them? Try changing cabs and see if you can drive from the other cab
I just ran the route - a few notes When you drop off the container train at track 203 draw forward, if the signal is clear and stop before the first set of facing points Check the 2D map - 9 key - and the road should be set in to 204. You must drive backwards and you may have to TAB past except it is Ctrl+TAB as you are going backwards Just clear the points and you should be ok to go fwd on to 205 Repeat to get to 203 with the train and only then change ends But you still need Ctrl+TAB to get out The Big signal is clear but it does not clear
