train simulator db br 643 loco cruise control speed {atf}can not work,If I press the cruise control speed {atf}button, the speed will drop to zero, which is like a bug in loco
I just tested the CRUISE SPEED COTROL of obb 4023, because the control method of CRUISE SPEED CONTROL of OBB 4023 and DB BR643 is almost the same, it can be determined. The CRUISE SPEED CONTROL of DB BR 643 is completely unable to realize the ATF function. Please be sure to fix it
Thanks huchanron2, We will certainly relay your feedback to the developer, RSSLO. Please could you indicate which version of Train Simulator you've tried in, 32-bit or 64-bit? Many thanks, Steve
[QUOTE =“ TrainSim-Steve,post:107365,member:250”]感謝huchanron2, 我們一定會將您的反饋轉發給開發人員RSSLO。 請您指出您嘗試過哪個版本的Train Simulator(32位或64位)? 非常感謝,史蒂夫[/ QUOTE] Please test it,I use 64bit
The manual says you activate the Cruise Control with Ctrl+A You then use the Increase the Speed set with Y or Decrease it with C. You need to Activate the Cruise Control when stopped and then set the Max Speed If you Activate the Cruise Control whilst moving the Brakes will Apply Peter
the manual say LIKE THIS: 2.7. Cruise control To activate the cruise control you must push the cruise control switch to position “1” (the switch is momentary!), the speed of cruise control will be automatically set to the current driving speed. Cruise control speed is showed on the display and can be changed with buttons on the display (+/- 5km/h) or with keys on keyboard. I followed the above-mentioned operation method but still couldn't make ATF SPPED CONTROL work properly. In my opinion, this is a very obvious software bug in the company's products. It is incredible that it has not been fixed until now
Have the same result,you can test after install dlc and undersatnd why I say the atf speed control have bug can not work