1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ts19 Updates

Discussion in 'News & Updates' started by TrainSim-Dmitri, Mar 18, 2019.

Thread Status:
Not open for further replies.
  1. TrainSim-Dmitri

    TrainSim-Dmitri Staff Member

    Joined:
    Jan 4, 2019
    Messages:
    534
    Likes Received:
    1,763
    18 March 2019 Update

    ÖBB 1014

    We are bringing a new update to Train Simulator: ÖBB 1014 Loco Add-On, aimed at fixing issues with ÖBB 1014 locomotive, and adding a new ÖBB 1114 locomotive.

    List of changes for ÖBB 1014:
    • Added new features: mirror and window animations, AI sounds and AI driver, sun blinds, dynamic numbering, 4 panto version, automatic start-up.
    • Fixed an issue where after performing the start-up procedure - the user was unable to select reverse. Forward directional arrow is now working correctly.
    • Fixed an issue where there was no locomotive information present through the Steam overlay when pressing "?".
    • Fixed an issue where the control for "Engine Fans" was named inconsistently between the game and the game manual.
    • Fixed an issue where the Door Selector control lever had no mouse over text.
    • Fixed an issue where consist list appeared to be inconsistent with manual, fixed some untranslated words.
    • Fixed an issue where the cab controls labels were inconsistently capitalised. These ranged from both words capitalised, 1 capitalised 1 lower case and both lower cases.
    • Fixed an issue with the locomotive brakes not worked correctly.
    • Update Size: 84MB
    Added a new ÖBB 1114 (with less weight and power):
    • Fixed an issue where the ÖBB 1114's PZB controls and message box were untranslated.
    • Fixed an issue where the rain streamed forwards whilst moving forwards on the right window of the ÖBB 1114. The rain should stream backwards when travelling forwards and forwards when travelling backwards.


    RhB Enhancement Pack 03

    Today we are bringing and update which adds French and German localisation to the RhB Enhancement Pack 03 for Train Simulator: Bernina Pass: St Moritz – Poschiavo Route Add-On:

    • Added French and German localisation
    • Update Size: 82MB

    No Updated Content? Steam File Verify

    In the unlikely event that Train Simulator fails to update, you’ll need to perform a file verify and ensure Steam provisions your installation properly. Follow the instructions link below to perform a file verify to reset your installation to default. Note that this process can take some time to complete and, if you have a high number of Add-Ons, we’d recommend you do this overnight.


    https://dovetailgames.kayako.com/Knowledgebase/Article/View/41/0/how-do-i-verify-my-game-files


    If you find that after the file verify has completed, you are confident you have not received the update, please contact our Support Team by submitting a ticket to our support site where someone will assist you directly.


    https://dovetailgames.kayako.com/Tickets/Submit
     
    • Upvote Upvote x 5
  2. TrainSim-Dmitri

    TrainSim-Dmitri Staff Member

    Joined:
    Jan 4, 2019
    Messages:
    534
    Likes Received:
    1,763
    18 March 2019 Update

    RhB Enhancement Pack 03 v4

    We are bringing an update to the Train Simulator: RhB Enhancement Pack 03 Add-On, aimed at fixing an issue that arose in the previous update.

    Changelog:
    • This update fixes a technical issue which emerged in the localisation update on the 18th March 2019. No major game systems have been affected.
    • Total size of the update is 77MB
     
    • Upvote Upvote x 3
  3. TrainSim-Dmitri

    TrainSim-Dmitri Staff Member

    Joined:
    Jan 4, 2019
    Messages:
    534
    Likes Received:
    1,763
    1 April 2019 Update

    Train Simulator: North Wales Coastal Route Extension Add-On

    We are bringing a new update to Train Simulator: North Wales Coastal Route Extension Add-On, aimed at fixing various route and scenery issues, as well as adding localisation.


    Scenery:
    • Fixed an issue with Britannia Bridge being too low
    • Fixed an issue with the Menai Bridge being out of position
    • Fixed a number of scenery issues at Holyhead and Llanfairpwll
    • Fixed an issue with Bangor signal box
    • Revised various stations which included some new platform textures
    • Added whistle boards for the whole route

    Route:
    • Fixed signals around Holyhead
    • Fixed a problem with the rain occlusion at Holyhead
    • Fixed the Conwy Tunnel portals

    Gameplay:
    • Fixed timing issues on the ‘Crossing the Border’ scenario
    • Fixed issues with Quick Drive routing

    Localisation:
    • Added French, German, and Simplified Chinese localisation

    Total size of the update is 650MB
     
    • Upvote Upvote x 8
  4. TrainSim-Dmitri

    TrainSim-Dmitri Staff Member

    Joined:
    Jan 4, 2019
    Messages:
    534
    Likes Received:
    1,763
    30 April 2019 Update

    We are bringing a series of updates to Smokebox’s Jupiter and C.P.R.R Buffalo steam locomotives.


    Jupiter
    • Improved the look of brass on the loco.
    • Headlight and coach light shadow-casting can now be toggled by pressing Ctrl Shift + S while the locomotive is moving.
    • Added an alert message when shadow-casting is toggled.
    • Lights in the consist are now toggled when cars are added to, or removed from, a train (if the loco's headlight is on)
    • Update Size: 92MB.
    C.P.R.R Buffalo

    • Implemented audio improvements: added the sound of water refilling the tender; reduced the volume of the clanking at speed.
    • Corrected the handbrakes on the CPRR Coach-Caboose. Previously they weren't being applied when uncoupled from the loco.
    • Corrected the bell so that the first strike (after the bell starts to swing) makes a sound.
    • Headlight and coach light shadow-casting can now be toggled by pressing Ctrl Shift + S while the locomotive is moving.
    • Added an alert message when shadow-casting is toggled.
    • Lights in the consist are toggled when cars are added to, or removed from, a train (if the loco's headlight is on).
    • Implemented a Track.bin fix for Hot Box Scenario.
    • Update Size: 63MB.
     
    • Upvote Upvote x 2
  5. TrainSim-Dmitri

    TrainSim-Dmitri Staff Member

    Joined:
    Jan 4, 2019
    Messages:
    534
    Likes Received:
    1,763
    TS19_Update_20May.jpg
    TS19 Update, 20 May 2019


    Today we are bringing an update to Train Simulator 19. This update features a number of changes to the ÖBB 1144, BR Class 205, Union Pacific No. 119 locomotives and the Frankfurt U-Bahn Route.



    ÖBB 1144

    • Fixed an outstanding legal issue in the cab of the loco
    • Update Size: 78MB.

    BR Class 205

    • Added the common assets folder which restores the missing Cab Secure Radio (CSR) lineside sign components which are required for the included scenarios to work properly.
    • Update Size: 44KB.

    Union Pacific No. 119

    • Replaced the artwork in the panels on the rear corners of UP119's tender.
    • Corrected the bell so that the first strike (after the bell starts to swing) makes a sound.
    • Headlight and coach light shadow-casting can now be toggled by pressing Ctrl Shift + S while the locomotive is moving.
    • Added an alert message when shadow-casting is toggled.
    • Lights in the consist are now toggled when cars are added to, or removed from, a train (if the loco's headlight is on).
    • Update Size: 83MB.


    Frankfurt U-Bahn Route

    • Added some projectors with an advertisement to the station: Suedbahnhof, Konstablerwache/D, Bockenheimer Warte/C, etc.
    • Added ‘Mind the Step’ announcement to lines U4, U5, U6, U7 for ‘U3 Train Type’
    • Fixed possible AI traffic problems between Dornbusch and Huegelstrasse.
    • Update Size: 671MB.
     
  6. TrainSim-Dmitri

    TrainSim-Dmitri Staff Member

    Joined:
    Jan 4, 2019
    Messages:
    534
    Likes Received:
    1,763
    TS19 Update 18 June 2019

    Today we are bringing an update to the TS19 Promontory Summit Route:


    • Fixed an issue with a Track.bin error in scenario C02. Guided Tour – Kelton to Promontory.
    • Update Size: 87.1MB
     
Thread Status:
Not open for further replies.

Share This Page