Epic Tsw2 Crash When Starting Sand Patch Grade

I played few times for Sand Patch grade, it was no crash, but now... It have crash almost everytime running.
Its random. Sometimes it runs normally, sometimes it always crashing like this.

I've been tired to run verify game files, it does nothing

My PC specs:

• i5-7600
• 8 GB DDR 4 2400 Mhz
• Intel HD 630
• WD Blue 1 TB 2.5" SATA III

Crash Log:

LoginId:e817a51048e6f2eba2355299e06d02d1
EpicAccountId:193691358691476cb9949940e6be0136

Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0x0000000000000008

igc64
igc64
igd10iumd64
igd10iumd64
igd10iumd64
igd10iumd64
kernel32
ntdll

 

Are running it on SSD or HDD TSW__ really needs to Run on SSD, Do you have any mods installed, if yes make sure they are not outdated. Did you edit the engine.ini if yes, back it up to a safe place and delete it, the game will re-create it look here if you need to
C:\Users\ YOUR NAME HERE \Documents\My Games\TrainSimWorld2\Saved\Config\WindowsNoEditor
Are the GPU drivers updated, are windows updated?
And If you need to contact DTG support. Support : Dovetail Support

 

Yes. I mentioned the drive is 2.5 inch SATA III SSD, not 2.5 inch SATA III Hard Disk Drive

 

Sorry for confusion, here's an update...

I meant the WD Blue is SSD, not HDD

 

The intel HD630 graphics chip is much too weak to play TSW.

 

Yes, integrated graphics are not supported. You may be able to play at some level, but results will not be satisfactory ie: low fps, hitching, freezing, crashing.

Also 16 GB of memory is really required, otherwise, out of memory crashes may occur.

SGTDRE, I think the above recommendations may be old and out of date.

 

okay, thanks. I wasn't feel its weak because i got it playable in other route. The worst is SEW at St. Pancras

 

They could be, and if so, DTG needs to update them. But, I just copied it from Steam. I was going to copy the text, but I grabbed a screenshot instead. Train Sim World® 2 on Steam. But seeing that this is TSW2, it still is well within the limits, seeing that it does not have the updated ToD versions nor any volumetric fog.

LoneWolf090545 This does not show SSD just SATA III WD blue, I have used
Seagate FireCuda Gaming 2TB SATA 6.0Gb/s 2.5" Internal Hard Drive, SSD drives can also be referred to as HDD, this why I asked.
But either way, the prior posts, have given you the info and what you may or not be able to do.