I have this trouble after every game save, but was able to fix it by turning the engine selector switch from "Central" to any other stage and then back to "Central". Works on PS5.
On a fresh start, none but I was alluding to the person above who is. However there are most definitely issues loading into a save game which either requires a physics reset or pushing buttons as described to get power back.
As noted above, try pressing the engine start and confirm failure buttons. Should restore power. But definitely a bug somewhere that the state of the train/cab is not restoring properly. If that fails, a physics reset should also cure it, but don’t forget to switch the brake key back on. Some of those 843 runs are two hours or more long so the ability to have a reliable save is absolutely essential.
Yeah, but saves and resetting physics break basically every loco except the very simplest ones, that's a core issue
Bonjour, j'ai téléchargé la route "Libérec - Stara Paka" et à première vue il semple qu'elle offre une idée intéressante mais en y regardant de plus près peu, j'ai un souci sur la ligne : "A Bit of Shunting - part 1". Je ne sais pas qu'en dernière ligne, il est indiqué "Preparation generate braking report" et à 391m, mais pas à quoi ça correspondre ? Peut-être que vous aurez des solutions ! Merci.
Where can we find some guidance for the CAN YOU IFX IT scenario, it is impossible to do I have tried every valve(s) and breaker(s) I can find, and nothing work, the engine goes to MAX, but not moving, after 3hrs, I just quit it will be the only mastery that I can not get :-( In the manual is says that at the end of the manual we can find the translation for the pages on the desk, however the translation is missing from the manual
That's why it's important to read the manual If somebody struggles with changing cabs on 843, I made a quick video showing the process. It is pretty straightforward as with most trains - secure the train against movement, cut off the brake controller, shut down the cab. Move over, and repeat the process in opposite order. And then, engage gear on the engines.
@bretond Please write your post in English. This is because the entire TSW forum is written in English so that everyone can understand it. If everyone wrote in their native language here in the forum, we would have total chaos.
Hi, feel free to watch my video and follow all my steps to get the train moving. However beware, as this scenario is uncompleteable at the moment.
Unfortunately this video is not too informative, and the main problem is I cant's see wht you doing becauser the Cabin light off, and that things what I barely see is that you mainly solve it with keyboard shortcuts, which are not available on PS5.
The important things to get the train moving are the things done prior to driving the train. From there once you're in the cab you drive the train as per normal, apart from having to restart the engine every so often. Watching the video in 4K may help assist with seeing what's happening if you're otherwise struggling.
I tried, but I had to restart the engines so often (which takes much longer on PS5 due to the lack of shortcuts) that I stopped on a 10% incline and couldn't start the railcar. This Scenario is currently unsolvable for me, so Mastery level 2 is not possible on this track either.
Did you try pressing the Neutral button and then the green button beside it? As I said above as well, the scenario is incompleteable due to a bug, which affects everyone.
The neutral button -> and then <- the green one beside it. You press one first and then the other, not at the same time.
In the Scenario Shunting part 1, it ask to generate a Braking report, I click on the desk to make the report appear it does appear but nothing happens after that When I do CTRL+1 to show the lollypop, I get a weird had like pressing a button icon, with 392m, when I get out of the train I can make this lower to 378m, but I still do not find what to do How do you end this scenario correctly, or is it another scenario that can not be completed
I believe this has been flagged in the Feedback thread, currently broken until/if the devs fix it and DTG can get round to releasing the patch.
Not that much, but still can't quite get over how immersive this route and trains are - just epic in every single department. Hopefully this team will continue to build for TSW. You can tell they've put in so much effort to make this as realistic as possible.
There are definitely areas, especially Turnov station, where some of the sidings are laid out on a green carpet, in some places the LOD on the grass is so strong that you can practically see it from two meters away, but yes, it's a very fun map, but I'm not completely objective, since I'm from the Czech Republic If they manage to optimize it a bit, fix bugs in two scenarios, etc. and maybe finish some additional DLC with another loco, etc., it will be pretty cool...but it will also primarily need the necessary fix for texture blurring on consoles and that's a prediction from the crystal ball and that won't affect Vectors Sim
Blurring is a core issue they can't do anything about. Also making "perfection" your standard will always leave you disappointed constantly. . It's more useful to compare to what already exists and see if it's as good or better...which I have to say I think it is.
If you read it carefully, it was added that it will not affect Vector Sim, however, it will be needed for future functionality with possible expansions.
Nobody talks about perfectionism, but within their map, the Turnova area is weaker in execution compared to other locations ...... When I sometimes follow your posts, you sometimes seem like some kind of normalizer of opinions EDIT: Moreover, if I suffered from what you describe, I would never be able to have this simulator in my life, let alone spend hundreds of hours on it, because it is not high-end quality in general, unfortunately.
Thank you! That's exactly what I'm going for... bringing balance when people get off track so to speak. Thank you for the compliment.
I already dig this route a lot... what it needs is more routes and locos in the same country, to form an ecosystem of layers like Germany and others do have in the game ... I am hoping we eventually get to that point
I've been looking at other social networks, the votes are going in that direction and maybe they're already preparing something else.
For me, the heart of the matter is the Kocour 742 (the 743 variant is also offered within Liberec) and then the motor car 854
I'd really like to see the 750 used again. It's a lot of fun and well built. Of course they'll probably want to introduce new stuff for new routes around the Czech Republic, but hopefully it'll still layer in. The Goggles is just great to drive and I think it's a well used loco in real life in the area. (Like the Class 47 for the UK back in the day?) There's subvariants of them I'm sure. I'm not up on Czech trains, but are most of the locomotives rebuilds and designs from the 1960s/1970s? Is there any cross-layering like the 642 some more? Really enjoy driving that more than the 843 =-) Maybe coordination with German or Polish trains and railways to extend maps that way? I really think they have a winner here, and expanding the network and rolling stock would only enhance the value.
I'm not a big fan of shunters, but then, Austrian 1063 and such ones are impressive heavy shunters that push consists up humps at Kledering and similar classification yards
They don't have to go so far and they practically have the possibility to make a Bardotka, series 749,751, or T478.1 and T478.2, those locomotives have the same bogies, maybe even the frame, and differ in the design of the tank, or the airbox. Everything I mentioned, even the loco 742//743, and 854, that's all design 1965-1980, roughly Just Elektronik, series 743, that was converted from 742 just for Liberec and the surrounding area in 1987 So the locomotive is asking for it to be designed into this map ..... I personally would like to see, similar to Just Train, the period of the 70s - 80s, I also have a model railway designed for this era, a time when the railway had the greatest charm, at least for me, and was still an important element in transport, the trains were varied, interesting and did not run at regular hourly intervals, so when it was running fast, you knew that it was right, what time it was and not that now it is the same every hour, etc.
We have very few 1970s era routes in the game at all, and none in the 1960s proper. Although in this case I think they'll keep expanding in the current era if they do since that's where they started.. and because the same stock is still in service apparently! =-)
I kind of learned to appreciate modern CZ/SK electrics, like 263, 363, 362, 361 or 350... especially 361.1, aka modernized versions capable of 160 kph and ETCS-equipped (had the opportunity to ride a 361.1-led express train from Trnava to Bratislava after taking the wrong train and ending up in Trnava lol)
A little greeting from my model railroad ....... I have a hard time with this area, I have to have a weathered done, and sometimes it takes work to really like it, I've edited this at least twice Cmelak, T669.0 (T669.1), these are also striking locomotives
Hello, I downloaded on the "STEAM" site the route titled "Libérec - Stara Paka" and I am quite happy with it. On the other hand, I don't understand why while doing the route 'A bit of Shunting - part 1', I can't find the last message that says to me: 'Preparation generate braking report'. Where should we go? Help me because I can't play "A Bit of Shunting - part 2" Best regard
Has anyone finished Timetable Mn62401 Part 8 (Shunting) ? I'm stuck on Track 8 after decoupling 2 railcars and the signals are red since half an hour. The dispatcher says: "Denied, wait for signal change" . There's no other train that could interfere with my path.
Yes, there is an error, after generating the message, the scenario is not completed...but I don't know if it would prevent you from playing the scenario, part 2, I have the second part completed...it and the first one actually run correctly, it just doesn't finish after generating the message and that's why it's not in the rating I am on PS5
I tried to create my own train in Designer Studio and insert it into Turnov, unfortunately it doesn't appear in the menu at all.....has anyone tried it, does it work for you? I can only insert predefined trains, but Custom formation doesn't work for me EDIT: I'll just add, it's not that you can't insert Custom Formation, it doesn't even appear in the menu for that location.... I don't understand where the error is
