The cement mix up and Steel Gaze appear to be broken? Cement mix up stalls at the part you have to venture onto the mainline to retrieve some wagons, signals are stuck at red, there appears to be 2 ai stuck further back up the line preventing movement even though they are on the opposite track going away from you. Steel Gaze, the instruction to use the throttle is stuck and won't acknowledge stopping further tasks.
Steel Gaze works. I completed it. But you‘re right about Cement Mixer. I think it‘s already been said that they‘ll look into it in a stream.
Probably an obvious thing but have you tried putting the throttle in all postions multiple times? TSW can be a bit finicky with its „put lever in position x“ instructions.
Thank God for that! I have been driving myself crazy trying to complete this scenario!! Don't know about 'Cement Mixer', but it certainly mixed my head up!! Will Dovetail pay for my psychoanalysis?
Both steel gaze and cement mixer are not working for me. Regarding steel gaze, I've tried playing with the throttle a lot without success.
DTG Natster Just pinging you to tell that basically 2 out of 3 scenarios for the 363 are bugged on PC and also services SH11 and SH12 cannot be completed from journey mode (https://forums.dovetailgames.com/threads/db-br-363-sh11.30878/).
I believe this is already being looked into, but I appreciate the ping non the less and I shall highlight the problem and see what's going on.
As regards 'Cement Mixer' Scenerio its still broken.You still get stuck unable to venture onto the main line.(16/11/2020)
Hi Natster, just a note seeing as you were here — I also had this issue on PS4, and noticed that the Finnentrop bound passenger services were strangely running loco first, and so far as I’m aware they should be running Dosto first when going that way. Hope that helps in some way.
Heard in the stream yesterday that the Cement Mixer scenario has been fixed, nice. But please, do not forget about the SH10+ services, which cannot be completed if started via service mode. Can't wait to complete this DLC.
I think the fix was a quick one, by just having the cement cars ready waiting in Hohenlimberg yard, rather than delivered — the passenger trains in the area are still running backward and getting trapped on the other side of the lights, only now it’s not impeding getting to the cement cars at Hohenlimberg. A kludge, true, but a practical one so we can at least complete the mission.
Interesting, thanks. I’ll have another look. Are you both seeing reversed 143/Dosto sets getting stuck at reds near Hohenlimberg and Hohenlimberg siding?
I don’t know if they were reversed but they were first stuck but when I returned at the end of the scenario there was no passenger train stuck
So same issue with Steel Gaze here: stuck at applying power. Great job, DTG, to leave this bug here 4 months after release! Why do we have such instructions in there anyway?? The BR63 introduction is another scenario, there was no need for this here... DTG Natster Is there any workaround to move the scenario forward? I understand it works for some people, but there must be a reason why it does not work for others. I was watching a video where it works, completely replicated the power lever moves, no go... My platform is a PC.
I got stuck with persistent 'set throttle' action yesterday as well. But today I finally found viable workaround. 1) exit the loco and lower couplers 2) continue with scenario up to the 'set throttle instruction', do not apply any power 3) fully apply all brakes, incl. hand brake 4) put the throttle in all postions multiple times as Lamplight suggested, until the instruction is marked as complete 5) set no throttle, release brakes You can continue with scenario now. You may pass a stop signal easily without step #3 as step #4 may take you a minute of throttle manipulation.