PlayStation Crr Services

Discussion in 'Troubleshooting' started by ehz0689, May 9, 2021.

  1. ehz0689

    ehz0689 Well-Known Member

    Joined:
    Feb 20, 2020
    Messages:
    444
    Likes Received:
    251
    Is there any issue with CRR when a service starts on a grade? I can not get the train to start and I have tried everything possible.
     
  2. GuitarMan

    GuitarMan Well-Known Member

    Joined:
    Aug 15, 2020
    Messages:
    583
    Likes Received:
    781
    Best practice is

    • apply independent brake fully
    • Release train brake
    • Apply throttle to notch 3/4 might need 5
    • Once amps have built up release independent brake you should move forward
    However, there are some problematic services, does this relate to a particular one?
     
  3. ehz0689

    ehz0689 Well-Known Member

    Joined:
    Feb 20, 2020
    Messages:
    444
    Likes Received:
    251
    I know how to do it and never had an issue on Sand Patch
     
  4. GuitarMan

    GuitarMan Well-Known Member

    Joined:
    Aug 15, 2020
    Messages:
    583
    Likes Received:
    781
    That’s ok. To help investigate though to know which services and what weather settings etc may be helpful, (although I haven’t done every service personally yet, this is not an issue I have run in to)
     
  5. ehz0689

    ehz0689 Well-Known Member

    Joined:
    Feb 20, 2020
    Messages:
    444
    Likes Received:
    251
    It's the services during chapter 2 in journey mode and its cause of the snow storm
     
  6. edward.gregg

    edward.gregg Active Member

    Joined:
    Jul 27, 2020
    Messages:
    166
    Likes Received:
    108
    I had a similar issue, with the Sd40 Starting from McGuire mine. I suspect I've got the name wrong. But I pinned it down to a brake issue so went back to the tutorial setting up the sd40 (as there seems to not be a manual) I then went back and set up the brakes as per that tutorial and off I went. And the PC was saved from being launched into the back garden via the window.
     
  7. ehz0689

    ehz0689 Well-Known Member

    Joined:
    Feb 20, 2020
    Messages:
    444
    Likes Received:
    251
    What did you do differently
     
  8. solicitr

    solicitr Well-Known Member

    Joined:
    Jun 20, 2020
    Messages:
    11,736
    Likes Received:
    17,949
    That one is notorious, because of the slippery conditions. If you start as designed, you can't go above Run 3 without breaking traction and losing it., just crawl all the way to the tunnel at 0.6 mph (no fun at all). Best workaround discovered to date is to back up all the way to the north end of the yard where the grade is flatter and start from there.
     
    • Like Like x 1
  9. edward.gregg

    edward.gregg Active Member

    Joined:
    Jul 27, 2020
    Messages:
    166
    Likes Received:
    108
    Ive just tried that scenario on the "Mainline Chapter 2" tonight. Its impossible to get it to move. "CRR Extra 3016" it is. Ive tried everything! Even what you have suggested "solicitr" :(
     

Share This Page