Still Experiencing Issues With Pathing And Red Lights?

Rhein-Ruhr Osten, Intermodal - Wuppertal-Steinbeck Yard > Hagen Freight yard, 06:29:21 freight service. After a couple of Saves, I am stuck at Wuppertal-Barmen and all trains upline and downline are waiting at red lights.

PC - Ryzen 7 / RTX 3060

 

Clinchfield
F7





I've tried everything the signal doesn't go green and if I drive over it it's over

 

The problem is that you left the caboose blocking one line, and you're blocking the other line, thus the train coming up from Dante has no way to go, and you are both deadlocked.
To complete this service, you need to be fast. If you get quicker to this signal, it will be green, and the other train will wait for you to collect your caboose and advance towards Dante.

 

Train Sim World 2. London Commuter. Class 166. Service 1V08 Gatwick Airport to Reading Part 1 09:01. Red signal just before Redhill, tried contacting signaler. In game time around 09:09.

 

Thanks for the reply, although I did make that comment back in February, this was before DTG JD had posted to say it was passed onto the team. Hopefully it'll be fixed soon.

 

Thank you for the acknowledgement. It's good to see these are still being worked on.

 

Are we supposed to believe this? Remind me again when was clinchfeild released? Remind me again when was London to Brighton on rushed out released??? Ooo how about horsefarce curve? sorry now that glitch simulator 4 has been announced once again true to form previous broken stuff is dropped and you use smoke and mirrors to convince us to waste our money on the new shoddy dross… do you remember the story about the emperors new clothes??? That’s you lot vs us…

 

PS 5
München-Augsburg and Rapid Transit have issues with the signals when driving with PZB. Usually you get 1000hz restrictions only, when a signal is yellow. On these two routes I get 1000hz restriction on green signal aspects. It all ways happens when a yellow signal turned into green. In this case the 1000hz magnet shouldn’t be active anymore but on these two routes it’s still active. Of course you don’t acknowledge a green signal aspect but because of this problem you get penalty breaks for doing nothing wrong. And even if you start to acknowledge every signal for the case that the 1000hz is active, you must reduce your speed to 85kmh.
That’s why it isn’t fun to drive on these routes.
Would be nice if you could fix it in an update, even when they are older routes

Thanks

 

Having the exact same problem, with only the Kassel-Würzburg Addon being installed at the time.

 

Yes. Please don't leave us with a broken game.

 

Platform: PS4
Route name: LGV Mediterranee
Loco name TGV Duplex 200 CM
Game mode: Timetable
Service name and start time: TGV 6175 Nice Ville starting at 12:52
Issue summary: When arriving at Marseille St. Charles the game said platform H but the train is direct to wrong platform K and this issue prevent finish service. Same issue for 10:28 service and 19:00 service

 

Platform: Xbox One
Route: SEHS Extended
Loco: Class 465
Game mode: Timetable
Service: 2K16 London Victoria to Gillingham @ 21:12
On approach to Gillingham, signal EK 4109. Red signal because of Javelin heading towards you being given priority. Signal stays red after this until a 375 service also passes you 5 minutes later. This results in you being over 7 minutes late to Gillingham.

 

This happens without saving. I tried both PC and XSX. Stuck behind a train at red light, but there are no other trains ahead.

 

Tengo ese mismo problema

tengo ese mismo problema
¡Tengo el mismo problema!

 

The rules of this forum clearly state: English only !

 

The dreaded 1M03 service on London-Brighton is broken again!
Not sure which update caused this exactly, but it was working fine for a few months after the gridlock issue due to a rogue AI train at London Victoria was fixed.

Anyways, the issue now seems to be at Three Bridges station, where your train is halted at a red signal not long before the first scheduled stop at Gatwick Airport. An AI train (service “1C51 Portsmouth Harbour & Bognor Regis to London Victoria”) is sat at a platform to the left with a green light ahead, but will not close its doors and depart at its scheduled time. This eventually causes a gridlock traffic jam in the Three Bridges - Gatwick Airport area.
Something with the setup of the 1C51 AI train is clearly wrong because “Not in Service” is displayed on the PIS. You can take over the train and close the doors, which will cause it to “wake up” and drive off, but that obviously means abandoning your own train and service.

Tested on TSW4 using my PS5 with the latest patch (Winter Core Update Part 1) and most of the timetable layers (except the Class 313, I believe) installed.

 

After last update each of my NYT runs (njt cab car) ends up in red light jam.

 

010624 - RSN Trunk Service is still broken, tried it again today:

DTG Matt 310524 Quote - Can I just ask - have you tried using tab to request permission to pass the signal?

We're looking at this at the moment and can't see a problem. You're going past this signal into an occupied road, so you'll need to request permission to proceed. We're just giving it a playtest through to confirm that - but if we let the AI run the scenario that's exactly what it does and it works.
The train blocking the path is this one:


And this is the screenshot of the 363 at the time: