I have tried and tried to get this Class 90 from armstong powerhouse to work in TSC but to no joy. Tried in free roam diffrent liveries etc still cant get it to work.
In your first screenshot, you haven't got the Pantograph up. Read the manual. Setting up the driver’s cab Please follow the steps below to find out how to prepare your class 90/Mk3 DVT from a ‘cold’ start. If you enter the cab, and the cab LED status lights are already illuminated, please follow step 3 and then skip to step 5: 1) Switch the BIS (Battery Isolation Switch) off by pressing ‘Ctrl+B’ on the keyboard. You should hear an audible clunk and the cab LED status lights will illuminate. 2) Release the parking brake by holding down ‘Shift+/’ on the keyboard until the indicator displays ‘OFF’. 3) Insert the master key by pressing ‘Ctrl+Z’ on the keyboard. 4) Raise the pantograph by holding ‘P’ on the keyboard until the Line Light LED turns to yellow. 5) Move the reverser to the neutral position by pressing ‘W’ on the keyboard twice. 6) Cancel the AWS warning sound by pressing ‘Q’ on the keyboard. 7) Turn on the marker lights by pressing ‘J’ on the keyboard 8) Turn on the main headlights by pressing ‘H’ on the keyboard for the ‘Day’ setting or ‘Shift+H’ for the ‘Night’ setting. Remember to also set the tail lights in the rear class 90/Mk3 DVT if you are driving one of these sets. 9) Turn off the Driver Reminder Appliance (DRA) by pressing ‘F’ on the keyboard. You should now be ready to move off. For information on how to do so, please see the ‘Driving guide’ section below. Page 23
Something not right there as all the nameplates are showing (looks like it is displaying all child objects) which usually indicates an issue with the script, not always the script itself either could be something that interacts with it like RWE2 or Cobras software in advanced mode.
You need to have WCML North + install the Mk3 Extra stock pack. It is beyond me why AP don't just update this to use their own Mk3 pack...
They would have to give the Mk3 Stock pack away for FREE or charge more for the Class 90 pack Free Roam scenarios are BLANK until the owner adds Stock on to the track
IIRC a few years ago they mentioned a possible 90 V2 pack, but nothing came of it in the end. I'd like to see them come back to it in the future, but there are plenty of other trains I'd rather see them do first. He knows that. That said, I don't know why it isn't appearing for them with the Mark 3 extra stock pack installed. It's always works fine for me.
They Don't just appear in Free Roam - Are you thinking of Quick Drive? It is not just up to AP as the pack was a joint venture between them and Waggonz
I didn't know that. Anyway, I don't use free roam or Quick Grive; I just drive the scenarios that come with the routes.
Why? They aren't giving them away for free with the Class 87, despite being a requirement for that, so why would they have to do it with the Class 90?
The extra stock pack only contains reskins. You need the WCML North for the actual Mk3s. Last I checked, WCML North still cost money.
