I have tried and tried to get this Class 90 from armstong powerhouse to work in TSC but to no joy. Tried in free roam diffrent liveries etc still cant get it to work.
In your first screenshot, you haven't got the Pantograph up. Read the manual. Setting up the driver’s cab Please follow the steps below to find out how to prepare your class 90/Mk3 DVT from a ‘cold’ start. If you enter the cab, and the cab LED status lights are already illuminated, please follow step 3 and then skip to step 5: 1) Switch the BIS (Battery Isolation Switch) off by pressing ‘Ctrl+B’ on the keyboard. You should hear an audible clunk and the cab LED status lights will illuminate. 2) Release the parking brake by holding down ‘Shift+/’ on the keyboard until the indicator displays ‘OFF’. 3) Insert the master key by pressing ‘Ctrl+Z’ on the keyboard. 4) Raise the pantograph by holding ‘P’ on the keyboard until the Line Light LED turns to yellow. 5) Move the reverser to the neutral position by pressing ‘W’ on the keyboard twice. 6) Cancel the AWS warning sound by pressing ‘Q’ on the keyboard. 7) Turn on the marker lights by pressing ‘J’ on the keyboard 8) Turn on the main headlights by pressing ‘H’ on the keyboard for the ‘Day’ setting or ‘Shift+H’ for the ‘Night’ setting. Remember to also set the tail lights in the rear class 90/Mk3 DVT if you are driving one of these sets. 9) Turn off the Driver Reminder Appliance (DRA) by pressing ‘F’ on the keyboard. You should now be ready to move off. For information on how to do so, please see the ‘Driving guide’ section below. Page 23
Something not right there as all the nameplates are showing (looks like it is displaying all child objects) which usually indicates an issue with the script, not always the script itself either could be something that interacts with it like RWE2 or Cobras software in advanced mode.
