I tried the new lgv route on xbox series x tonight and it seems like the TVM and VACMA are broken. Let me explain : I select all the buttons in the rear of the conductor seat (so I allow tvm, vacma, crocodile and kvb). But then during the trip : -I can't hear the ringing of the vacma so I always get emergency brakes even if I aknowledge when the HUD marker is yellow... -TVM start working and shows 270 then suddently 170 in the tunnel and I get an emergency brake (without intermediate signals). Then after Avignon, TVM shows 270 then all disappear and again 270, and so on... It never shows 300 or 320. Is it only me or is it seriously bugued ?
Update: I can confirm TVM and VACMA seem to not be working correctly on xbox. As described by the OP. VACMA does not make any sound, and when the "!" is displayed on the HUD it's too late and you have to reset the throttle. TVM only displays 270, and if there is a speed change to 320, it just goes blank to then to 270 again. Anyone having similar problems either on xbox or other platforms let us know, please. TVM VACMA Recorded it in the scenario "High Speed Rain" but it's the same in timetable services. Same result in timetable service from Avignon to Marseille. Actually from Avignon to Marseille it's even worse... the TVM just gives up and doesn't display anything Are we playing an early dev build?
Same here on original Xbox One. I watched Matt's demo on YT a few times and there are a few differences: - After activating the master switch, self-test does not light up all the lights - TVM display does not seem to be showing the correct readings. In the tunnel after power change location it shows 270kph, then about 5 kilometers ahead of Aix, emergency brake comes on as a result of breaching the speed limit - VACMA does not ring at all, after the "!" displays power had already been cut and you have to reset the power handle - HUD does not show set speed in 'Selected Speed' mode - Departing Marseille, when speed limit changes up from 30 to 60kph on HUD, KVB still applies 30kph limit, signals over 35kph and cuts power at 40kph. Maybe its related to train length 10 vs 20-car formation but you definitely have to wait a few hundred meters past the moment HUD max speed is updated before you can speed up.
Didn't even notice the absence of the blue semi circle in the HUD from the missing selected speed ahahahah, but yes, noticed all of the above mentioned bugs. Also sent a ticket via the kayako site
I seem to be sharing all the same issues. A few notes I took from my first run out of Avignon. standard Xbox One 7:41 TGV to Nice -TVM will make noises but wont show on the dash when boosted to the green numbers on the left. A work-around that did work was to turn around and flick the TVM switch off and on and resulting in a green 300 popping up. -TVM did not wait on any reductions before applying emergency brakes. When approaching Aix-en-Provence from the North TVM switched to 170 from 270 and emergency brakes came on right away. -Contrary to what Matt mentioned on a Stream. The TVM indicators did not show up at all if TVM was not switched on, so the only way to see them was to give it braking permissions. - VACMA alarm was not making noise as the light appeared on HUD. -Though it may be because of the specific service. The max speed signaled by TVM was 300, and was 270 from about 25km away from Aix-en-Provence. (To see 300, the TVM switch needed to be switched off and on) -Speed Selector did not show on HUD Other than these issues with the safety systems. The train and the route are marvelous. The sound is incredible, and it ran rather smooth on a standard xbox even at high speed. However it seems a world away from what Matt played the other night on the stream on xbox given the problems with the safety systems.
Yep same issues here on a Xbox series X i was so confused but now it makes sense hope we get a fix soon
I had all of these issues as well. Got the stop signal on TVM as I entered the platform at Aix en Provence. TVM remains blank unless on 270, or occasionally 300.
Appreciate you highlighting this and the videos included are really helpful. I will pass along your feedback and keep an eye on further comments.
They were playing build 204 on the Xbox stream (briefly noticed it when the settings were opened at the end). They have deployed build 191 to us. Now could be a dev build branch (204) but still feels like it was a later update (had achievements). Please sort out this ASAP because safety systems are what make a route more engaging and achievements need to be added in. I am getting no passengers on trains too (all empty).
Yes, we were told this is what we will be getting on Thursday but not quite...I am hoping a priority update will be released soon. Full price route released in a different state to what it was on the Xbox stream. At least the FPS is fine (Xbox One X). Moving the camera feels really zippy compared to other routes because of this.
Same happens to me here . How do these big and obvious bugs get through i mean its on the first scenario I think they released the wrong build or something judging by build numbers.
I only completed the training so far but I can confirm that TVM isn't working at all on Xbox. It's completely blank all the way through. I can't comment on the other safety systems because I haven't used them so far.
It wouldn't be a DTG product release without some kind of issue. This is exactly the reason why I hold off before buying things. I used to buy TSW on release day, but not any more. I'll wait till it's fixed and probably reduced in price.
Well they’re going to have the up their game because I’ve seen preview clips going around about some competition currently in development
No, safety systems is what makes the route playable, unless Matt writes in this forum or tells in a stream that the time scale for an update would not be longer than for example the IoW fixes I'll ask for a refund. TGV cannot run without TVM
Given that the route worked well for Matt in the stream, it's quite possible that the wrong build was uploaded to Xbox Live. In this case it should be only a matter of uploading the correct one.
I don't want to wait for one week ! I know this kind of things may happen but it's completely unplayable right now ! I didn't pay 26 euros for this kind of mess ! Really, dtg had the exact same route on TS and they're not even able do bring a correct tvm and vacma system on tsw... Come on ! I'm quite upset
This is has been raised internally and is already being worked on. I will share more updates with you when I have more news. I understand it can feel disheartening when something isn't the way you expected, but we are working to resolve this.
See the update too. 624 MB update to TSW2 core - first time I have not had to redownload it all again. However, looks like LGV needs a whole download. Thank you for getting this up very quickly.
Speed selector now shows the speed on the HUD. Anything on the achievements? In the game now updated and don't see them.
I can confirm it is fixed on my xbox, thanks for being so quick and efficient, really appreciated! Great job
Same happens if you reload a save. I found out if you turn the master switch off and back on again it should reset itself and fix it
So has this issue been sorted already? Was excited to get this route until I read the comments here. If it's sorted I will probably get it. Depends on how well it performs on xbox though. Any comments on the performance of the route on a standard xbox one?
About 20/25 fps all around ~40 on the tunnels. Only problem is the usual drawing distance which in the more open area makes the scenery appear out of thin air, but nothing too major. Performance is not an issue, now that it has been fixed I'd say get it it's worth it.
Thank you DTG Natster for the quick response and fast fix. Now it seems to work well But is it normal to have zero passengers inside the TGV ? I made the 14H00 service to Avignon and I can't find any passengers inside the train :/ On xbox series x
It seems all the products you release at launch will have some sort of issue. It's not suprising at this point
Seems a pretty "stupid mistake" in the sense they just seems like they uploaded the wrong version... the fact that has been fixed before 24h deserves much praise
I have one x and I get between 30 and 50 fps hovers more around 45 alot in HD not 4k. 4k get around 30 to 40 fps. when in stations then dips into mid/ high 20's briefly.