PC Br 143 Issue (doesn´t Accelerate)

Have some problems with the BR143.
It happens several times in different scenarios after a normally ride with some normal stops in stations, that suddenly after stopping in a station, that I can not drive further. I raise the drive lever (for example to 60km/h; the blue bar in HUD is rising too) but the train does not accelerate. I had all brakes released, I repeated apply and release brake, several times (including orange button in the cab). I´ve done additional the procedure as in the tutorial for the BR143 after emergency stop procedure, but it don´t work. Tried too Main switch off - on, Panto down - up; I gear up the whole lok, doesn´t help. Is this a bug? Or do I something wrong?

 

Not too sure mate I think it’s a bug. I can accelerate fine in the 143 so haven’t got a clue there sorry

 

Automatic Brake to Running
Speed Selector to OFF
Wait for BC is zero
Select speed and go

 

Yep, this should be your solution!

 

I have to hold it in the release position for it to work

 

I try it next time. (Perhaps I have not waited long enough for BC)

 

Got the same problem on Xbox one s. You stop normally at a station or signal then afterwards regardless what you do it refuses to give you power to move again.

 

Play (reset) with the speed selector (OFF<>ON). BC has to indicates ZERO.

 

You have to release the brake fully for a couple of seconds and then you should be able to power up