Class 101 Unable To Get Throttle After Update.(solved Not Update Related)

Discussion in 'Troubleshooting' started by Rob39, May 31, 2019.

  1. Rob39

    Rob39 Well-Known Member

    Joined:
    Oct 14, 2018
    Messages:
    1,886
    Likes Received:
    2,023
    Dont know exactly which update. Sinces Tees release the class 101. Throttle goes or dosent get started at all. Driven many services in these units, I know how to get them set up. Nothing I do fixes the issue.
    Also on Ntp the clag isnt reliable anymore.
     
    • Like Like x 1
  2. BROCK

    BROCK Active Member

    Joined:
    Aug 10, 2018
    Messages:
    159
    Likes Received:
    101
    Seems like this update messed up a couple of things, I have to check NEC to see if anything is affected.
     
    • Like Like x 1
  3. Rob39

    Rob39 Well-Known Member

    Joined:
    Oct 14, 2018
    Messages:
    1,886
    Likes Received:
    2,023
    So far ok on a darlington to Saltburn service currently at dinsdale, but I couldnt get out of Darlington station on the seaside scenario.
     
    • Like Like x 1
  4. FallenAngel00me

    FallenAngel00me Well-Known Member

    Joined:
    Mar 11, 2018
    Messages:
    463
    Likes Received:
    327
    Just checking. Are the engines on in the seaside scenario?
     
    • Like Like x 2
    • Helpful Helpful x 1
  5. DTG Matt

    DTG Matt Executive Producer Staff Member

    Joined:
    Nov 17, 2016
    Messages:
    2,679
    Likes Received:
    13,793
    Hi Rob39

    I just tried it on an internal build and it seemed fine - can you walk me through a couple of things?

    Is it just the Seaside scenario you're having difficulties with?
    Do the engines start up ok in the first unit and the lights come on correctly in the indicator board on the top left?
    Do the brakes release ok and show released on the vac brake gauge?
    Is the issue when you do the first move with the 3 car, or the second move with all six?

    Do you happen to have a video you can share of this?

    Matt.
     
    • Like Like x 2
    • Helpful Helpful x 1
  6. Rob39

    Rob39 Well-Known Member

    Joined:
    Oct 14, 2018
    Messages:
    1,886
    Likes Received:
    2,023
    Yes everything was fine. From a starting point. got in the unit, engines already running. switch on control key, set lights, destination front and rear. reverser into forward, brakes fully released. Aws aknowledged. No throttle whatsoever. The rev needle was positioned at 5 0 clock and would not move instead of the usual 6 o clock position. Scenario was the 101 special to Saltburn.
    Tried a 101 in service mode from Darlington to Saltburn and that particular one worked fine. I will post screenshots.
    Think youve solved it for me FallenAngel00me TrainSim-Matt . I jumped straight in and started up as if it was on service mode. The engines I could hear (thinking they were mine)are from the 101 parked next to me. The scenario works perfectly. Thanks for your Help. FallenAngel00me
    I also must have knocked the engines off whilst running on ntp and tees this week as I got the 5oclock needle position. ( It came to a halt whilst I was taking external screenshots).
    Thanks again for your help.
     
    Last edited: May 31, 2019
    • Like Like x 2
  7. DTG Matt

    DTG Matt Executive Producer Staff Member

    Joined:
    Nov 17, 2016
    Messages:
    2,679
    Likes Received:
    13,793
    Aha! Great news, thanks for letting me know, I can relax now :)

    Cheers, have a great weekend!
     
    • Like Like x 3

Share This Page