It is simulated on the BR101 / IC Expert coaches :) 1. The door side selector won't work above 30 km/h (so even when you decelerate below the...
At least the reported (and some unreported) ZDS bugs should be fixed (whenever the next patch is released). Regarding the compressor in ZDS see...
Changed status or added bugs. 27. Some faults have missing display statuses. Status: Submitted to DTG. Workaround: If the emergency brake applies...
32. Expert Mode logic not running correctly in some of the tutorials. Status: Work in progress. Workaround: Enable "Expert Mode" in the Player...
Oh, I think I know what the issue is. You're playing with Expert Mode disabled, right? I just tested it myself right now and with Expert Mode...
The real "throttle" doesn't have a notch in the "up" position, which makes for really terrible control with keyboards or digital controls. I...
A lot of the noise on "idling" German asynchronous AC electric locomotives comes from the "HBU" and converter oil pumps. The HBU...
If you are on a route with no network at all (mostly would happen in the editor afaik) you can press "E" to silence the beep.
You may need to press the "overcharge" button to lower the pressure in the "Zeitbehälter" to around 3-4 bar (which equals an overcharge of 0.2-0.1...
By "classic panel" what do you mean? EDIT: I would interpret "classic panel" as the ZDE (the physical panel with buttons on the rear-left of cab...
In this thread I want to give troubleshooting or workaround steps for some of the reported bugs and also give some status reports on how fixing...
Yes, this is the same bug. The two locomotives are "fighting" to be the master in some situations when using ZDS (or ZMS). I'm currently...
Yep, this is known about (and has been fixed, but unfortunately I can't say when you'll have that fix in your PC/Console).
Sounds like you forgot to release the parking brake :D I'm confused why it didn't scream at you "Federspeicherbremse!" when you applied power...
That's something neither I nor Raph' can answer. It's up to DTG and Fabian who made the GSMR function :)
Use the "Angleich" (overcharge) button to raise the brake pipe pressure 0.1-0.2 bar :) EDIT: I see this was already answered. I guess it doesn't...
Brake Release only acts on the locomotive, not the coaches. It also only works when the locomotive is not in Emergency Brake mode. When you press...
To enable Sifa you need to make sure that: 1. The LSS (circuit breaker) is closed in the machine room. 2. The Sifa isolation switch is in the...
There is a bug with the core PZB function that causes this issue. Essentially the bug occurs when you get into restrictive mode and then stop and...
You're operating under a few mistaken beliefs I think :D 1. The locomotive goes into 125 kN electric brake (brake mode dependent) if the...
Just a minor clarification. I added this to the Vectron (and then to the Expert vehicles) because it is sort of how it acts in real life. It's...
RailDriver support for both the BR101 and the cab car is planned, but I'm not sure if it will be in the next patch unfortunately.
I have bad news for you: you are trying to solve something that is realistically meant to happen. If you don't want to lose a lot of speed, don't...
For those that still are having door issues, could you please provide some more information? 1. Have you confirmed that the "ZS aus" light is...
Because the battery simulation is not scripted but done in Simugraph.
The blinking PZB indicators when LZB is active is a bug we know the cause of and are working on fixing. AFB will undershoot when braking, that is...
Always the lowest out of [lowest vehicle max allowed speed in formation] and [max allowed speed according to timetable]. Both the coaches and the...
It used to be possible, but I'm not sure since TSW4. I remember back in TSW3 or before there were mods that replaced the ICE with the original IC...
The manual is available in both English and German :) Br101 Expert + Cab-car: Manual And Guide | Dovetail Games Forums
TLDR: If, after a certain amount of time driving, you have issues with the doors not locking and the "lock doors" task not completing, make sure...
Next time this happens, move the MCB to "Open" (with cab active), it should release the "HS-Sperre" (main circuit breaker lock).
One thing to note is that the IC coaches do not have automatic load proportional braking (i.e. the brake force does not increase with a higher...
BRH 83 is wayyy too high in the ZDE :D Remember that the number is in tens. So 83 would be 830. If you want to input Brh = 83 (i.e. the braked...
The train data input (ZDE) is a bit tricky on the MFD variant. 1. The reverser needs to be in Forward (V) and the locomotive has to be...
This is something you would be best served by making a bug ticket directly to DTG for, but if you are on steam you can try to verify integrity of...
1. Nothing I can think of really other than if you close the cab (reverser to "0"/"Off") or pass a neutral section. It is feasible that you got a...
[ATTACH]
Check inside the machine room on the left side when standing in the door from cab 1. There is a console with the main and auxiliary compressor and...
Could you give some more details of when/how this happens? I just tried it myself in the game and I am able to acknowledge Sifa and forestall the...
Remember to keep the train line ("ZS" aka Electric Train Supply) active at all times. What you are seeing is the battery dropping below a...
That one should be fixed in the next patch for the BR101 Expert :) (we fixed it before release but unfortunately that was before the deadline)
There seems to be a bug here in the ZDS logic, which I thought I fixed before but I guess you found an edge case (which I was able to reproduce in...
It being the generated energy does sound like the bug I was referring to. That only happens for the generated energy number (orange). :) Did you...
Thank you for the kind words :) The parking brake light (Federspeicher Anlegen) actually works as in reality. The parking brake spring is pushed...
Was this formation a mix of old IC coaches and Expert ones?
I have added the ÖBB Taurus (1116) in the list of locomotives that are compatible with the cab car. Note that the formation needs to be all IC...
That's what I thought as well initially, but UE supports this already from what I understand. You can have different save game files (tagged...
Currently (at release) all settings on the St page are non-persistent between play sessions. Making the settings on that page (at least the Chaos...
Both the BR101 Expert and the Bpmmbdzf 286.1 (Cab car) has a different sand simulation that is intended to be more realistic than what is done by...
Don't give me ideas :D
Separate names with a comma.
