I don't know of any old UK locos that have notched controllers apart from the Class 76/77 and the AC Electrics And as the US locos the RailDriver...
There was three versions South Wales Coastal - 00000064-0000-000-000-0000002016 (not available) South Wales Coastal -...
Then download and install the Class 373 patch from Backdated TrainSim. You can run it on any Electric route in the game and when on normal UK...
One of the Controllers sets has two separate handles for power and brake - like on a HST. The RailDriver also has two sets of handles on the same...
It might be worth checking the format the laptop save them in - it should be .jpg - if they are not it could be the problem What size are the...
Attention: This route extends the Konstanz - Villingen Route that needs to be installed into your Train Simulator installation (Shop- or...
What do you mean by "Old British Stock"? Steam Locos?
I presume you already have the Konstanz - Villingen route? The extension won't work without it Try a Quick Drive on the Konstanz - Hausach route...
You were the one pointing out that John was wrong when he was not.
Most Vectrons have a maximum speed of 160kmh. Some of the newer ones can do 200kmh. It might depend on the loco selected If you still don't get...
Don't download something if you are not prepared to do some work to get it running. If you did want the AHS Eurostar to work on HS1 then you need...
Go to the folder where the scenarios are located - Highlight them and Right Click - Properties If it says Read Only untick that box
I don't understand "i believe transitional as what its in now" Have you contacted CW? - https://caledoniaworks.com/contact-us/
Try it on a different electric route The AHS Eurostar won't see the Cab signals on HS1 I usually try it on London to Peterborough
I don't think it was that. But I did find in \Assets\RSDL\IslandLine\Scenery\Railwaymen some files called Railwayman50sxxxx and remembered a...
When I look at the old I.O.W Network route I get a Graphics that in not normally visible in the editor but comes and goes every few seconds...
Look in your Assets folder Do you have a \AHS\UNDERSEALINE\PreLoad folder? If not reinstall it.
It is in Quick Drive under AHS. You have to select an Electrified route to use it You will have problems in using the coaches as they are in an...
Not quite what the OP asked though
Normally ticking the EFX box in the Settings does that.
Do the people on Railworks America have any info?
So you still don't know if the reskin is causing the problem or not.
Try uploading it without that reskin and just the default loco You would then prove that it is or not the problem.
I did not say you were using third party rolling stock. I said it is finding a problem. Only you know what you have used in the scenario Do you...
I presume you mean Liverpool - Warrington - Manchester. Run a Quick Drive on the route using the 158 that comes with the route. See what the FPS is
I think this is just somebody Spamming the forum. They post a question then ignore the replies
You could have mentioned it and the patch.
£11.49 - (RRP: £22.99)
He should be able to translate a reply and let us know if it works. 4 posts with a question in each and no reply. Suspect it could be Spam -...
I think when it says Ready to Publish it is being checked and if it finds a problem then you get Failed to Publish.
Please explain with a Picture. Don't know what you mean by "Handles between two jointed rails" This is your 4th post and you don't bother...
Chris Trains are now hosting the TSC Docs "I have some good news. After some communication with DTG, they have officially agreed to let me host...
Do you mean the view that you see when you go in to Build? Sometimes the view goes under ground and if so you can select the icon and move it...
The signals are Wartezeichen that have a letter W and two lights illuminate to allow you to pass them. https://de.wikipedia.org/wiki/Wartezeichen...
Yes, both Scenery density and Scenery Quality are at Max.
Thanks Neil, The problem I'm having is a signal does not appear in the game even though the HUD shows it is there. I have been underground to see...
modified
That patch on ATS says "*Updated following AP update 06/06/2020 tweeking the top marker light brightness*" Not tried it myself
Is there a way to see what the LOD is for an Asset if you cannot see the asset in the game?
I am calm and I'm not your mate.. You did not reply to my question so I presume you do not need any more help.
It is not a Free Drive Do you know the difference between a Free Roam and a Quick Drive - two different things? In a Free Roam You place a train...
You seem to be missing the point where the OP does not wish to change the track or shoulder ballast but the ground texture. These track patches...
Are you running a Quick Drive or Free Roam?
Separate names with a comma.
