Thorgred I think he is refering to my post...
Try right clicking on the "TSClassic Interface (x64).exe" file and selecting Run As Administrator
I have just tried the 802 with the original PieHid64.dll and not using my program and the ThrottleAndBrake still only goes to 88%. Because of...
Hi VonckjeNL If you are refering to the current version of my program, I have just tried both the SNG and ICMm using my Raildriver and the loco's...
Hi Proton Unfortunately it's not possible to adjust the deadzone for each loco individually. I have just tried the BR 642 with my Raildriver and I...
Hi Proton Navigate to "Documents\My Games\TrainSimWorld6\Saved\Config\WindowsNoEditor" and edit the Raildrver.ini file. Look for the section...
Can you try calibrating your controller using the menu option Settings\Calibrate Joysticks. On the window that pops up, select the SimWorkshop and...
Unfortunately, although the distance you refer to at No 2 is shown on the HUD, there is no way for me to get that from TS itself. The only option...
Here is a fix for those assigning the walking options to a joystick lever and find that moving the lever slightly from neutral makes you run and...
I have just setup my Sidewinder precision 2 joystick and it works fine! There is no need to change the Range value as it works fine on 0, 1. That...
Unfortunately, that is how the Raildriver is setup in the loco itself, it does the same using the original PieHid64.dll. There is nothing I can do...
Try selecting the ThrottleAndBrake and not the ThrottleFullRange in the Enabled Assets. Although the two loco's have separate Throttle and...
The changes are mainly under the bonnet or to automatically detect the new TSC-X controller. The actual keyboard key assignment is setup by DTG, I...
You can also edit the Raildriver.ini file located in Documents\My Games\TrainSimWorld6\Saved\Config\WindowsNoEditor\. Look for the...
In the Master Lever Map, have you 1. Set the ThrottleAndBrake and Throttle to use the same lever. 2. When assigning the Throttle, did you say Yes...
In a word, Yes. Unless the creator of the content fixes the problem first. Chris
You can't, it is assigned in the Master Lever Map : [ATTACH] and can only be used as the BailOff. The reason being, on the Raildriver the BailOff...
I have just tried the Vectron 193 using the original PieHid64.dll that comes with TSW and although, according to the settings for the Vectron, the...
Not sure yet as I haven't tried it. I have been using CurrentDrivableActor to create a lever map file for each loco. I have managed to extract...
It is working for TSW 5 but not for the Raildriver. There is a command in the api to turn off the PieHid64.dll but that is not in the TSW 5...
TSW 6 Free Version - TSW Unniversal Controller Interface TSW 6 now has a api that allows programmers to talk directly to TSW without using the...
First of all, make a backup copy of your current version, Then download V2.0.1.5 above and extract it to your current version overwritting...
TSW Raildriver & Joystick Interface V2.0.1.5 released. This update is for Steam users only. This version will look for previous Raildriver.ini...
Not in my program or TSW, but I would always advise doing so in windows just to be sure. You can do that by typing joy.cpl in the search bar or I...
The only difference between the ThrottleAndBrake and ThrottleAndDynamic is with how the throttle works. The settings for the Reverser, Wiper and...
Yes it is
Using TSW Raildriver & joystick interface with TSW 6 If you have used my program with TSW 5, do the following: 1. Install TSW 6 but do not run my...
Have you assigned the lever you use for ThrottleAndBrake to the Throttle also in the Master Lever Assignment? When my program detects that you...
Unfortunately not, it's all or none i'm afraid. Chris
It does for me too, the only way I can get TSW 6 to crash is if I start my program and then copy the wrong dll ie the PIEHid64Net from the main...
I can't think of any reason why this should be happening as both 5 & 6 are basically the same game as far as my software is concerned and many are...
LeadCatcher It's difficult to diagnose the problem as I can't recreate it myself. I am working on the possibility of an alternative way to...
Those who are having trouble with notches being skipped or the levers not responding as well as they did in TSW5, can you copy the Raildriver.ini...
I have just tested the 802/0 and can confirm that it does not work with my program or using the original dll without my program, but the 802/1...
doctorwhiff#5697 Can I assume that as you have not responded, that the problem was with your Flight Deck software running at the same time and...
Hi Kim Yes you can use other joysticks at the same time as the TSC-X but you would have to setup the Master Lever Map yourself. Chris
Hi Jareb If you edit your button mapper, in the 3rd column called Control you will find the 'Raildriver Toggle Speed' macro. When assigned to a...
I have not come across this before at all. It sounds like something else is sending keyboard inputs. Does your software for your joystick load a...
Hi Lionel Just to confirm, we are talking about TSW as this is the TS Classic forum! If we are, then can you try copying the following to your...
The error reported is saying that the connection between my program and TSW is being blocked, i.e. the named pipe \\\\.\\TrainSimWorld cannot be...
Hi Lionel It may be that the TSC-X controller needs calibrating. Type joy.cpl in the search bar at the bottom of your desktop, in the window that...
I have just tried the RABe 523, Luzern Sursee and it worked fine! Can you select the ThrottleAndBrake in the Enabled Assets window and see if that...
At the moment, TSW only supports the Raildriver controller which has the following levers Reverser, ThrottleAndBrake, TrainBrake LocoBrake and...
Are you using TS Classic or TS World? If TS World 2 onwards, then you are using the wrong version of my program, get the TSW version from the link...
Hi Marc + Jessica This program is not as powerful as the TSC version because all it does/can do, is emulate the Raildriver. If I recall, most...
H1 Romeozonex I am not sure where you are setting the lever to the PowerBrake option, is it here in the lever map? [ATTACH] or are you updating...
That is odd, especially as, at the moment, you are the only one reporting the problem. I have a couple of things I can try to see if I can fix...
Hi Tof, If you select the ThrottleAndBrake in the Enabled Assets, then your TSC-X should work fine. The problem with the 86/87 is that they use a...
Separate names with a comma.
