Wouldn't expect them to announce what's coming in a pack they haven't said anything else about... If people want things to be right, putting in...
If you're running TSx of an SSD and you have another disk / drive for file storage then 500Gb should be fine for most installations, so long as...
Uninstall reinstall of the route would be the first thing to try
Picture from the stream showing the HS1 route on approach to the A282 [ATTACH] Picture from google streetview just under HS1 from approximately...
You need to look up and right from your posted picture, At the point you're looking at the clockwise A282 is above and the anticlockwise A282...
I cross it 3 or four days a week, it's shown in the pics as it looks in real life
The QE2 bridge is a cable stay bridge in the middle with two standard support leadups, not suspension [IMG]
The station pictured is Gravesend (platform 2 shown) The service pattern INTO London from here is 2 SEHS via Ebbsfleet, 2 ThamesLink via Dartford,...
One gets stored at Faversham sidings, the rest return to the depot This is why some morning services start outside of Thanet or Faversham (such as...
Welcome, and welcome to the raildriver world LOL
I would imagine that because the remaining services go via HS1 (Ebsfleet lower) and this would give a driving time of about 18 minutes they didn't...
Having sat in the front carriage of a 395 many times... you can't normally hear the motors so I doubt you can in the cab either
Adding the repaint to GWE and then as a minor layer in SEHS would solve the issue (so long as you have GWE I guess)
Do a repaint on the aggregate wagons and have them port in South of Strood and out at Northfleet. Not drivable but as AI only and only if you have...
Tons of reference material shows the fencelines, how they're placed, what they look like etc It's hard to miss them as most of the time you can't...
Chatham Mainline or London to Brighton
This is mystifying for several reasons...
This is the discussion forum for a game, a game made by a company with a track record for getting things almost right, but I only ever speak for...
Yep, of course it would actually limit TSW for some. Personally I won't buy anything outside of the UK that's not in a bundle because it holds...
Have you made sure you're running TSx in 64 bit? If you start it "as default" then that's 32 bit
Everyone? Are you sure... I couldn't give two hoots about light levels in the tunnels being more concerned with train operations. Similar with...
I don't think anyone's expecting DTG to produce every route from TSx into TSW2, but as I said I wouldn't want to limit them either as there are...
For those commenting on the lack of services, a quick search on RTT for a CHATHAM weekday service shows 199 SouthEastern services running through,...
Hoo yard is a permanent way maintenance yard so is mainly full of 66s, aggreggate wagons and occasionally engineers trains on the south side and...
My footer is fairly accurate
Whilst not wanting to limit routes "because they've been done before" there are loads of tram experiences available. Driving down Damrak into...
The only trains which do Faversham to Gravesend are the Javelins, the 375s don't and never have done that run All trains via Gravesend (up til the...
Hypothesis more than rumour. I believe I started that one It was based on the targets and awards being posted on steam, which usually means a few...
don't think you are... I just uninstalled, reinstalled, recalibrated etc found something which worked on mine... Start the RD listener program...
Go to http://raildriver.com/support/TrainSimulator.php Download RailDriverTS2019 from that page Install it That's the listener program After that...
Once you've run the calibration program you then have to load the "listener program". Should be under PI engineering on your start bar
We shall find out tonight I guess
Not seen it mentioned before so I would say it's not likely from DTG. There may be a freeware version though
OK, downloaded it, installed it, checked for QD - none Checked for scenarios - none, but then I don't have any spanish routes Went into scenario...
Can't remember on the DTG version but you may also have to accept the computer config, if you look up and right from the forward view there's a...
If it's too soon after a reboot then steam likely wasn't completely logged in. It's on a delayed start and even when it boot up it does a version...
Maybe steam was having a moment when you tired it before. Steam client (or bootstrapper) needs to be loaded and logged in before TSx will run it's...
Thanks, I'll test it when I get home tonight
Did the message say to open the program via steam or that you had to have steam client open to run it as that's what I get if steam isn't started yet
Probably the driver vigilance device, you should get beeping happening, but not the AWS bulb (the yellow and black) I believe E cancels this alarm...
Neither
There are always certain issues on individual installations or parameters so I would suggest opening a support ticket for this and giving them...
Have you got a link to the download so I can try on my own installation?
They already are so presumably they will (and more will join them) in the future too
Don't know as yet, maybe cover for the 395s, stock moves etc If the route is set in the now (which it seems to be) then the 465s don't run many...
When were routes being rapidly released in TSx? I've been playing that for a few years now and the DTG releases have always been one every few...
So the revs are showing as a number (ie the engine is started) but they don't change when you set the reverser and apply power?
DTG have said repeatedly on stream : The order that things appear on the roadmap is not indicative of their release date They concentrate on...
Are you using the F3 or F4 HUD, if F4 HUD are you using the onscreen controls? Do you have TS1 set to beginner or advanced controls? Have you...
Don't think the "extra stock" matters as to when you install it as it doesn't affect the main package but installs other bits Main then branding...
Separate names with a comma.