German Signalling is Very Easy to Learn because of the limited number of aspects the Signal shows The route comes with a Manual which is installed...
The Class 40 is passing Reddish Depot on the Gorton/Faifield to Trafford Park line. Not on the Woodhead line and more than one junction away from...
There is already the London to Brighton route which covers the line to South Croydon - beyond that point most trains are Class 377 emus. And there...
The Class 101 Dmu is a Slam Door train which either the Passengers or Guard closed. There is no Automatic system for closing the doors
The outer windows looks slightly bigger because they have a black rubber strip in the picture but I believe all three windows are of the same size...
I don't think there were any Flashing Yellow signals on this line as the Maximum speed was around 80mph in this era.
You might be better asking on Railworks America as most people there are running US routes more than UK or European http://railworksamerica.com/...
If you were to just run the default scenarios that came with the routes it will get boring very quickly. There is a small number of UK routes...
We don't have the TGV Duplex in the livery shown in the picture at the top of this thread.
So when you drive the scenario from say Hamburg to Hanover how does the system know where the train is going to stop in Quick Drive or even which...
Instead of just having a few trains in one location go in to the editor and put them where you want along the route. You could even start off...
You can. Start anywhere on any route and drive the train you want anywhere along the line - if you spot a different train you just stop - click on...
DUPLICATE
On the real railway the driver did not have a HUD and he learnt the line to know where the gradients were. You could do the same with some quick...
[1] In Quick Drive you already do this - You chose the Start Location and the End Location, neither of which needs to be at the start of end of...
I think DTG should produce the Manchester Victoria to Leeds and York route. The main route would Run from Manchester Victoria but start 1-2 miles...
I went in to the Editor and changed Service 2 so it does not leave Seefeld and after saving the the scenario works ok. A bit boring as there are...
Except I reported it over two weeks ago when it was posted
I just had a run and collided on the single line with the other train running south
As GBE have already done half the route why not ask them to extend it instead of DTG building it from scratch?
I reported that post but DTG don't care so anybody can post whatever spam they want :(
They are changing their webpage to https://www.thirdrails.org/
An EMU heading towards London Liverpool Street shortly after departure from Shenfield [ATTACH]
One of the vehicles available on the Portsmouth Line[ATTACH]
Something like this? https://shop.strato.de/epages/64554512.sf/de_DE/?ObjectPath=/Shops/64554512/Categories/Category1/NBS_Ingolstadt__Nuernberg
need to check your links Schnellfahrstrecke Nürnberg–Ingolstadt–Münchner Zur Navigation springen Zur Suche springen Diese Seite existiert nicht...
Then go in to Build, Clone the Scenario, Edit the scenario by either changing the platform your train is going in to or just Delete the other...
When it asks if you wish to restart the game say No. Then close the Game and restart the 64bit mode as normal Or put a bat file on your desktop...
The Locomotive faces one direction. Obvious with a Steam loco but not a Diesel or Electric When you attach the "front" of a loco to a train then...
What is the error message?
Have you thought about asking on UK Trainsim? Somebody there might know. But it's not really a bug with a DTG Product. Peter
Have a look on the Just Trains Website for more info - the route runs from Paddington to Bristol Parkway and to Cardiff and from Bristol Parkway...
You don't need to buy the game again as it's the Program that runs the game instead of the Content. On the drive where you have your TS2019...
Even if we knew about it we would not be able to fix it without editing the QD Scenario which is not as easy as the normal scenarios Peter
You will get an answer to this fault if you report it to DTG instead of just mentioning it here
And if you look at two posts above yours you will see ARuscoe said the same thing. I suggest you report it to DTG Peter
Third party add-ons that are Sold tend to work fine because the seller would lose custom if word got out about a problem. Freeware Add-ons...
I tried the Munchen - Rosenheim REAL DRIVE which I enjoyed as the run was interesting with the verity of trains and following two slower services....
I notice we don't have a proper Coach U yet - or it that something they cannot be bothered with?
Your favorite phrase "Is there an easy way" - No there is not Some German Scenarios include announcements. If you wanted them for your runs you...
Better than "Altenburg Wildau" is "Im Köblitzer Bergland 3" which includes the section to Wildau and has a full 75km of route...
Only spoilt by having the Doors open on the Class 506
As it is unlikely DTG will make the unit I'm quite pleased the a reskin is available in to the 374 :)
The picture of the Keyboard layout has been removed as some people seem to think it applies to EVERY Item of stock and the say there is a BUG when...
Why is everything a Glitch to you because it does something you did not expect.? The Key controls Do Not Apply to EVERY Item of Stock. You can...
Have you thought about asking the people making the Add-on? https://www.facebook.com/BossmanGamesUK/ You will get an answer from them rather than...
Maybe he should have said "Are there any NEW UK routes coming out soon on TS2019?" The last new route was the Waterloo - Portsmouth line in July...
There is No Release. This is the Proposals Forum where people suggest what they would like to see and why.
This thread is about an Austrian train and an Austrian route - you seem to have the wrong country.
Separate names with a comma.
