I have just released V3.3.0.8 of my TS Classic Raildriver And Joystick Interface which now fully supports the TSC-X controller and auto configures...
TS Classic Raildriver & Joystick Interface V3.3.0.8 Released Now with full TSC-X support This version contains the following changes: 1. Will now...
Not sure what happened there but if I zip the files using 7zip, windows reports the file as a virus. If i use windows built in zip function, no...
raz22 LeadCatcher I have run 2 x 1 hour sessions on 2 separate PC's, one of which is a triple screen system. I even kept switching in and out of...
Hi raz22 No, the updates only affect the TSC-X controller. Having to start TSW to get the levers working again implies that TSW has stopped...
Update re V2.0.1.4 This only affects those who downloaded the program between 2.47 PM (GMT+1) on 20/07/2025 and 7.15 AM (GMT+1) today 21/07/2025....
I have just released V2.0.1.4 of my TSW Raildriver And Joystick Interface which now fully supports the TSC-X controller and auto configures the...
They are now updated in V2.0.1.4, simply select the version required such as ThrottleAndBrake, ThrottleAndDynamic and ThrottleFullRange...
TSW Raildriver & Joystick Interface V2.0.1.4 released. Now with full TSC-X support This version contains the following changes: 1. Will now auto...
Hi Emmy_MAN First of all I would like to say, sorry to hear about your illness and I hope you can make a full recovery. Yes you can create as...
Just to clarify for everyone who has purchased or is considering purchasing the TSC-X controller, it is perfectly OK for you to use both my...
I'm affraid not. I have rewritten the PieHid64.dll used by DTG in TSW so that it will accept input from my program. If you use the dll without my...
I'm going to need more information. Are you refering to calibrating in my program or TSW? Does the error say which file isn't found? Are you using...
Have you calibrated your Raildriver in both my program and TSW? If so, did you calibrate it in my program first? If not, rename the C:\Users\[YOUR...
Old age creeping in, I forgot to include it in the latest release. Here is a link to the Manual...
The Range values are only used if you have a single axis assigned to the TrainBrake and LocoBrake. This is so that you can use a single joystick...
Hi Conductor B Have you tried the settings in this post...
Hi Serenity First of all you need to locate where your epic games are installed, I think the default is C:\Program Files\Epic Games but you may...
After a sucessful conversation with Spark Chen from SimWorkshop, he is sending me a TSC-X for testing and development purposes. I have agreed to...
KCRCRailway As you purchased the controller in good faith, I don't think it is fair for me to penalise you for what the company has done. I...
Because I have found out that a commercial company is using my software in order to get their hardware to work without my permission and I now...
This is why both my programs clearly state, Not for commercial use, ie a company selling hardware should not be reliant on my software to work...
Can you post a copy of the Raildriver.ini file located in Documents\My Games\TrainSimWorld5\Saved\Config\WindowsNoEditor. Also a copy of the...
Hi Crrispy The lever assignments only gets updated if a Raildriver is detected when you first run the program after downloding it. I can only...
For the 350, try these notch settings: 0.000:0.109:0.000, 0.111:0.243:0.220, 0.245:0.290:0.267, 0.292:0.336:0.314, 0.338:0.379:0.360,...
Hi Crrispy Can you check the lever maps to see if any of the controls are actually enabled, if they aren't, does enabling them fix things? If none...
As it is not happening all the time, it would indicate maybe something else is conflicting with my program. Do you recall installing or running...
Do you have a debug.txt file in the main folder for my program? If so, can you delete it, start my program and run a scenario and see if the file...
Hi Crrispy Can you double check that the Settings\Mode\Standard has a check mark to its left, I know in the past that sometimes this does not get...
LeadCatcher PrimeMoverSimulator I have tried my best to recreate your problems but to no avail. Can you both try running the program as an...
Can you start a scenario and my program and click the Start Callback button, then set both brakes to full on. Next can you click the Stop callback...
That is something I am not prepared to do for the following reasons. 1. They are a commercial enterprise 2. If I converted my code to incorporate...
Hi haskell99 The only controller that TSW was designed for is the Raildriver from PI Engineering, and it uses a single lever for the Throttle and...
As they use proprietary hardware and do not show up in windows as a joystick device, they will not work with my software. TS Controllers supply...
Hi Konstantin Which Arduino are you using? I know of two libraries for joysticks, both with examples. 1....
Here are links to versions 3.3.0.7 and 3.3.0.6...
I've answered jisastre via email, but for those interested, it is not possible to retrieve the name of or distance to the next station. Chris
I have not come across this before, so is going to be a little tricky to diagnose. Can you try the following: 1. Run TSW without my program...
If you download the PI Engineering Windows SDK from here https://xkeys.com/software/developer/developerwindowssdk.html and once installed go to...
Try calibrating your Raildriver again in my software, but don't push the Throttle lever all the way back, or if you do, bring it forward slightly....
Go to your "steamapps\common\Train Sim World 5\WindowsNoEditor\TS2Prototype\Binaries\ThirdParty\PieHid\Binaries" folder and you should have a...
Yes, As TSW is expecting a Raildriver which has the ThrottleAndBrake split in the middle, I have to also split the ThrottleAndBrake in TSW for...
It's in the folder where you installed my program.
Hi Paul As you are using the Xbox version on PC and not the steam version, have a look at this post...
Separate names with a comma.
