Since we were asked to feedback: this route is great! Sounds and art are delightful, the ICMm's chopper noise in particular is very convincing....
That part at least is not a bug. There’s only a handful of speeds ATB can control: yellow (40), 60, 80, 130, and green (140). Anything other than...
The update is quite good, but there are still some signalling issues, mainly position-type route indicator. No matter what route you get out of...
I wonder if the issue (at the southern end of the Le Prese passing loop if I remember correctly) is ZSI magnets placed the wrong way around...
Mmh, I am pretty sure that combined signals should not display the advance signal if the main signal part is showing a danger aspect. On the RhB,...
The HUD mode not saving is now fixed on consoles, but the "Display Current Speed" and the track monitor settings still don't save. Is a fix for...
ZSI 90 (which is what is implemented in game, IRL all of the RhB network has now switched to ZSI 127 which works differently) is quite basic. When...
You can see pretty good photos of the before and after here...
The turnout at Alp Grüm used to be at the end of the platforms. In the late 90s (or maybe early 2000's? Not quite sure anymore), they relocated it...
That's not a bug. The Ge 4/4 II is an AC (11,000V, 16.7Hz) locomotive, the Bernina line is the only part of the RhB network that runs on DC...
Jasper_Rivet Here's the list of speed boards I could find that differ from IRL. I've added as much detail as possible, each should have the...
Jasper_Rivet I've taken notes of wrong/misplaced signals and speed boards so far — would a spreadsheet listing them + position + IRL values be...
Oh, one more thing — the platforms in general are pretty bad, usually way too high. This is the worst example I could find, at Ospizio — the...
Overall quite happy with the route! I've found a few issues, report below (PS5): Signalling: The exit signal from Cavaglia (northbound) displays...
I was going to ask in the Q&A thread since that got mentioned during the stream yesterday, but this has been closed. DTG JD, what's the plan for...
IRL, the Allegra does its own shunting (using the line out of Tirano as the head shunt). Pushes the coaches back somewhat, then uses the runaround...
On the other side of the Bernina Pass, the announcements are actually made in Romansch first, then in Swiss German, and in English. But all...
That's actually accurate! "Allegra" is a greeting in Romansch, the fourth Swiss national language (and historically, the main language in the...
So I took the time to experiment a bit! The results are: From the "I" end of the locomotive, things behave as they did before the patch — you can...
I would definitely understand 10 second, but in this case it's more around a minute. Anyway, like I said, with the current version, even if you...
As I said, any brake. Using the vacuum (train) brake alone causes the exact same issue. Regardless, the original behaviour that was mentioned in...
That you are unable to take power at all after using any brake for at least a minute? I doubt it, that would make the locomotive completely...
So, it would seem Rivet managed to bring back the "feature" from the very first version of Chur-Arosa, where any brake application will result in...
I don't want to say it has never happened because RhB formations can be a bit of a wild card, but if it has happened at all, it's extremely rare....
Interesting, thanks! That's interesting! I've heard it's the same reason the ABe 4/4 III are not diagrammed anymore at least for this winter on...
Yes sorry, I didn't include the lines that now use EMUs. The Surselva line... uses the NevaRetica railcars in the consists, but always run around...
To avoid speculation: to my knowledge, there have never been cab cars in use on the Bernina. Before the Allegra, the line was operated by railcars...
The Allegra-looking At and Bt cab cars are too long to be used on the bernina. They are based on the ABe 4/16 Allegras, not the 8/12, which have...
That's how it is IRL. Sometimes freight is added at the back of passenger trains, other times Allegras haul freight-only trains. There is one...
I was at Tirano this summer, they do all the shunting with the Allegra itself. Push the coaches back, detach, run forward, then around, then some...
in real life, a Morpeth (speed restriction warning) board (these downward triangle yellow boards) is required if the drop in speed restriction is...
Free Roam isn't Off The Rails, the trains still need the correct type of current collection. The class 801 (or any of the IET stock really) does...
I just checked the sectional appendix and it looks like a majority of the crossings are CCTV now, so I'd assume some workstation somewhere. There...
TSW Nathan Feel free to just re-upload the PDF files wherever you end up making your guides Just credit me as Amy Parent or amyinorbit
And here's down fast (the forums aren't letting me add it to the previous post)
Here are the updated sheets, both for up and down direction now. Fixes a couple mislabelled places, a missing neutral section or two, as well as...
Absolutely, go ahead!
Platform: PS5 I’ve tried to run 2x5 car Azuma services a few times now and it seems every time the train struggles to accelerate much past 90MPH...
What trains are you spawning? Not sure if TSW4 actually implements that, but not all electric trains use the same voltage and (when it’s AC)...
Found something interesting (which correlates what someone above was saying about coasting): When bring the power handle to the "off" position,...
One thing to remember also: the Azuma (and all class 80x afaik) end cars are trailers (DPT, Driving Pantograph Trailers), so you won't hear the...
Separate names with a comma.
