Would have though (fairly) present day due to the 153/9, but with the HST also appearing it must be a little bit in the past.
2 things you have to remember about the ‘remasters’ 1) They need to be QA tested before release 2) They are more like ‘patches’ than ‘DLC’....
The ‘710’ services are ECS moves to/from Gospel Oak & Barking I believe. As it seems that 378 ‘Player Substitution’ on WCMLS appears to be all 710...
Probably not 750v, as I believe the current is set to a slightly different level on the Watford line, as LUL work on a 630v system of +420/-210v....
Matt has implied over various streams that ‘route merging’ is a possibility, and could be done. The new timetable required to make it work would...
No. 8tph each way Stratford - Willesden (for 20 hours would be 320) 8tph each way Highbury - Haggerston area (Windrush line services) (for 20...
Are we getting 378135-378154 (DC only), or just 378201-378234/378255-378257 (Dual Voltage). If no DC only sets, will the Dual Voltage ones be...
Are you sure its the Pendolinos that are ‘missing’ or are you expecting to see the Voyager/Evero services - which aren’t in the DTG Timetable, and...
You may be able to play them on on the short section of the Windrush Line from Highbury though.
The licence from TfL probably states that they must call it by the current name. Maybe “Mildmay Line : Stratford to Willesden Junction” would be...
The 350s in the game (350/1s) were ordered as 450s before being diverted.
I don’t think its a route length problem, but the choice of route. Matt said on one of his personal livestreams recently, when I asked about...
I think it would be an earlier period, rather than current. They had to ‘improvise’ on the 484 on IoW, as no licence for SWR, but they have...
Are you actually waiting until it asks you to complete each part of the objective, as if you are “infront” they won’t complete properly.
Just done a conductor service on a Blackpool South - Colne service. Whilst you get points for "declining" logically valid tickets, such as St...
This is where the community can come together and improve the game. Out there, there must be people who are good at some of the following, but...
Why? The E-G pack is complete, and ready for release. It doesn’t affect the FC pack, as they are 2 completely separate routes, and so lets get...
JD said ‘Bolstering the timetable and adding new scenarios’ so looks like additional services.
No, its Stratford to Willesden, so hopefully Willesden - Richmond & Clapham Junction will come soon afterwards - maybe their next project.
The 3rd Party did initially say in this forum that he was wanting to do a full London Network, so hopefully this is just going to be the start of...
1988 the ECML was still being electrified, and even by 1989 I think they only part of the ‘new fleet’ to have seen Edinburgh was a Mark 4 on test...
As Tom said when asked about updating the 142 destinations for this route, they are already on there, so that may give you an answer.
Not sure if it has corrected by now, but in the last Dev Blog, the coach numbers were wrong - the RFBs should be 100xx and FOs 110xx. They were...
I had the same problem with trains not moving, but if you set local time using ts2.dbg.setlocaltime then it starts to work.
Then I think it won’t work. The 1972 will only work over Bushey-Kilburn High Road, if you try sending it to Watford it says its an unreachable...
If IoW is 3rd rail based, then it should work Watford-Euston. If its 4th rail based, then it’ll only work Kilburn High Road - Bushey, as thats the...
If DLoGW is set in 1971, then the locos should be pre-TOPS, which they aren’t. However, hopefully a ‘remaster’ (set around 1977) could improve...
[ATTACH]
Is there a particular way you need to set up the 710 in the editor in order for it to start on AC or DC mode. Tried setting it up with...
Did one of the 710 ECS trips from Willesden to Euston. When you board the train, it appears to be set up for DC, despite being on an AC only...
Have just rewatched the stream and looked at the figures displayed The screen shows Total services - 690 350 - 244 377 - 36 710 - 219 - which...
One of the biggest gripes in here are the missing services (which may appear yet!), but people are wanting more timetables creating for other...
Judging by the level of the account, and the number of achievments unlocked during the stream, it would appear to have been a fresh install /...
If you access what track is already there from BML, then it appears to just be Waterloo itself thats missing at that end, so if it can be reused,...
If you could get the liveries made, then you could also have the 450 (and 444). Depending on era, maybe even a 707.
That was when the TPE sets were repainted ready for transfer to LNWR.
Is the 710 going to be the 5 car /3 version, as used on the line in real life. Assume any NLL services seen as AI at Willesden will be using the...
They did work quite a few freight duties on the WCML, either Solo, or paired with another 87 or 86/0, 86/3, 86/4 or 86/6 due to the jumper cables...
Maybe with all the latest upgrades to the game, they may have actually managed to get the updated Bakerloo timetable to work with the dispatcher,...
We have Blue Mk2s (non AirCon) already, and are getting blue Mk1s with the EC Diesel pack, and with the 87+Mk3s coming with Shap, an 86+AirCon...
With TSW5 coming soon, would it be possible for the newer version of the route to have the 3rd rail and electrification extended into the portals...
Hopefully the 380 can be incorporated as AI in Edinburgh on both routes, as Rivet will have to create a new timetable for Fife include the 158 &...
I hope that the units covering ‘non existant’ types (156/318/320) have been set up in such a way that (if or) when the correct types arrive, they...
Spawn on foot, walk to the edge of playable area, and then spawn in a train, and you can have a non stop run through the station. At Doncaster...
If they are going to extend the map to allow this, can they extend the OHLE & 4th rail into Upney / Upminster & Dagenham Portals, as currently you...
The set that arrives into P10 at Central at 0748ish comes in with the lights on the wrong ends. Correct ends when departing at 0751 though
Yes it does. Just hope they set it so it will work on the 4th rail as well as 3rd rail, as the 313 doesn’t work on the DC lines. With a bit of...
Yes. Just exit and reload, so it clears memory used.
Send the train to the portal you want to enter, and then set the position in the box below to ‘1’, rather than ‘0.xxxxxxxxxxx’, and then it should...
6pm UK is 10am US, when Valve start their working day, and are available to sort out any problems that occur.
Separate names with a comma.
