7. Spot lights on both BR 101 and cab car only have one cone in volumetric fog. Status: Submitted to DTG. Workaround: None Details: Thanks, Fabian...
None of the locomotives should have a Hazard Lights button where the Railpool one has it. That button is the fire extinguishing bottle. I honestly...
The Expert timetable for Frankfurt-Fulda is coming, have patience :) With the timing of the BR 101 Expert DLC and TSW5 it was always going to be...
I did work on the Flixtrain Vectron and the Talbot coaches :sweating emoji: The brake pipe pressure releasing is a bug in the ep-brake system and...
Someone more knowledgeable can correct me if I'm wrong but it is not the RAM or the GPU that is the issue for PseudoStalker but the CPU. Shader...
Yep, that is the procedure. No. The locomotive and coaches as simulated only have TB 0 (only lock/release, no side selection or feedback).
It will :)
If you drive a lot of 2x101 formations I think you'll like the update ;)
41. Suspension on the BR101 and cab car. Status: Work in progress. Workaround: None. Details: I have added suspension on the cab car (coaches and...
You're overthinking it. If a train acts unprototypically 9 times out of 10 it is due to a mistake/lacking resources by the developers, not because...
From my understanding the DB Vectron has LZB IRL, it was a mistake in the article before.
Sounds like the PZB bug (but I could be wrong). If you deactivate the cab with PZB active and under some influence the emergency brakes apply...
I have some bad news and some good news. Let's start with the bad news first: there are a few bugs on the loco that has to do with towing mode and...
Depending on which traction motors that are disabled this may disable electric brake blending in service braking and emergency which means that...
I will talk with Lukas about the 218 issue. As far as I know the 218 is not compatible with all the Dosto coaches in the game...
TB 0 is just a signal state in the UIC cables. Either a permanent signal (on the BR 101 it would be the selector in "lock all", on some other...
50. Bugs in the unlocking logic of the auxiliary control stations. Status: Submitted to DTG. Workaround: In cab 1 you can make remove control from...
Yes, except for one thing. The Türsteuerung switch does not revert the locomotive to TB 0, it shuts off both SSTF and TB 0 together. The only...
The LSS being open disables the whole system. TB 0 still requires "Türsteuerung". I've been told even TB 5 requires it. Regarding what you would...
You have no evidence to make this conclusion. Whether DTG were retaining their new customers or losing them, the decision would be the same. Let...
Were this while driving from the cab car? If so you may need to press the "Overcharge" button to overcharge the brake pipe. The easiest way to do...
[ATTACH] Small teaser. This is from the editor and I have edited the screenshot slightly to not get in trouble :D DISCLAIMER: I do not know when...
This should be fixed in the next patch, if I'm interpreting your issue correctly (see point 49).
44. Made brake pipe accelerator behaviour more realistic and variable. Status: Submitted to DTG. Workaround: None. Details: After reports on the...
I imagine that ZWS might disagree with that configuration so you'd have to isolate it on one of the cab cars. Although I can't remember if Dostos...
No. The bug is that AFB doesn't care about LZB becoming inactive. In real life it will wait 10 seconds and then start braking to 0 km/h. If the...
I just want to touch on one point you raise: 1. Adding a Bistro/Restaurant coach is very much not "a small thing" :) . It would be almost as much...
It might be due to the batteries running out of charge on the coaches. See this thread: Br101 Expert: For Those With Door Issues. | Dovetail Games...
Well, have you tried not doing the prototypical reset procedure and see what happens? ;) That's the only way you'd really know if it works...
43. Incorrect behaviour of AFB during LZB Ende. Status: Submitted to DTG. Workaround: None. AFB will do nothing when leaving LZB for PZB, while...
It is simulated on the BR101 / IC Expert coaches :) 1. The door side selector won't work above 30 km/h (so even when you decelerate below the...
At least the reported (and some unreported) ZDS bugs should be fixed (whenever the next patch is released). Regarding the compressor in ZDS see...
Changed status or added bugs. 27. Some faults have missing display statuses. Status: Submitted to DTG. Workaround: If the emergency brake applies...
32. Expert Mode logic not running correctly in some of the tutorials. Status: Work in progress. Workaround: Enable "Expert Mode" in the Player...
Oh, I think I know what the issue is. You're playing with Expert Mode disabled, right? I just tested it myself right now and with Expert Mode...
The real "throttle" doesn't have a notch in the "up" position, which makes for really terrible control with keyboards or digital controls. I...
A lot of the noise on "idling" German asynchronous AC electric locomotives comes from the "HBU" and converter oil pumps. The HBU...
If you are on a route with no network at all (mostly would happen in the editor afaik) you can press "E" to silence the beep.
You may need to press the "overcharge" button to lower the pressure in the "Zeitbehälter" to around 3-4 bar (which equals an overcharge of 0.2-0.1...
By "classic panel" what do you mean? EDIT: I would interpret "classic panel" as the ZDE (the physical panel with buttons on the rear-left of cab...
In this thread I want to give troubleshooting or workaround steps for some of the reported bugs and also give some status reports on how fixing...
Yes, this is the same bug. The two locomotives are "fighting" to be the master in some situations when using ZDS (or ZMS). I'm currently...
Yep, this is known about (and has been fixed, but unfortunately I can't say when you'll have that fix in your PC/Console).
Sounds like you forgot to release the parking brake :D I'm confused why it didn't scream at you "Federspeicherbremse!" when you applied power...
That's something neither I nor Raph' can answer. It's up to DTG and Fabian who made the GSMR function :)
Use the "Angleich" (overcharge) button to raise the brake pipe pressure 0.1-0.2 bar :) EDIT: I see this was already answered. I guess it doesn't...
Brake Release only acts on the locomotive, not the coaches. It also only works when the locomotive is not in Emergency Brake mode. When you press...
To enable Sifa you need to make sure that: 1. The LSS (circuit breaker) is closed in the machine room. 2. The Sifa isolation switch is in the...
There is a bug with the core PZB function that causes this issue. Essentially the bug occurs when you get into restrictive mode and then stop and...
You're operating under a few mistaken beliefs I think :D 1. The locomotive goes into 125 kN electric brake (brake mode dependent) if the...
Separate names with a comma.
