That's right. And i tested/tried it for hours or even days. But it was not working on my end at all (even if it should by the settings). I told...
Would place it in line with noting because of its non existence then. Simple as that. It's Math.
As said already, the 101 Expert is done by people that have nothing to do with the general TSG production situation. There are still project...
You know that i made that loco too? If not, now you know. And i can say that the TSW one is way way above what the TSC one is. I can also say...
There is no current pricing structure for such a extended product. This is a new category of a train only DLC. And i may repeat other says, but...
The 101 Expert is not part of all that (the general daily TSG work). TSG will further pushing out simple cheap products for sure. The Expert loco...
Can't remove what was not added. It happens automatically. Try to run the trains in gear 1. That should help.
We ware working on a solution for that. At the moment i have no clue why that does not work as expected. It's all set up correctly from my...
Feelings are not all. I got told the days back when i made the BRO n-Wagen that they were way to weak on the brakes and then i adjusted it to what...
Way more patience than you are able to achieve atm as it seems :D
The n-Wagen wont work with the 112 at all. The 463 uses KWS36 to signal to the loco, the 112 only understands KWS34 and ZWS.
That will be fixed with the upcoming patch. At the moment you have to arrive at Bargteheide entry signal at around 12:40 or you will get stuck....
I fixed that here to the more prototypical variant already. Will be coming with the 218 patch. Normally the direct brake levers are chained...
Then you used the switch with an active cab aka. reverser was not in Off position. The 2 in the HUD says that too. exactly that, when it gets...
Off in this case means neutral gear like in a car. You can then haul her like a wagon. She would not move with its own power when set to Off. To...
Even the smoke has some sort of LODs . In the case of that emitter it has two if i am right. The second LOD is to save performance and therefor...
Just from the picture (it doesn't tells the whole story) it can't release the brakes as the MR is at only 4.2BAR and so the BP can't get higher...
Correct, when heating is on the engine runs at 950-1000 RPM. When you then fill the transmission it gives plenty of power into the gearbox. There...
The 110 i did for BRO has it, definitely. I didn't made the copy for LFR, so i have no idea what happend there. Maybe it broke or was stripped for...
In that case the MU switch on the 218 need to be set to OFF (0) so the 218 does not send any signals via the cables. They are not compatible at...
That's not true. The G6 is usable on lots of newer routes. There might be no new scenarios and such but lots of timetable runs and subs.
Don't know. No, the MU switch on the 111 can also being set without any cab activated. It's even necessary to do that before activating the cab...
When you span in FreeRoam or the timetable services have not entered the correct spawn configuration setting, you need to manually set the switch....
We already fixed that and will be good with the upcoming update. There was a wrong snow/rain mask applied to the livery editor material what...
Also the older ones with D2/D5 have a dedicated "button" for it. It's this thing marked in the image: [ATTACH]
On those older locos the battery is always connected. The main battery switch is besides the battery itself (mostly on the exterior). It gets...
That's just a text problem for the HUD promts. Sometimes it can't get the correct idea what notch is where. With those tiny steps it has some...
Yeah, ok, you are right. But i will not implement that as most players have to much of trouble with it because most just put the lever to the end...
Not sure, but i guess you guys mismatch some things (and it might even be wrong in ZUSI then .. ZUSI is not the godfather of all simulations, it...
He couldn't even give any insights because he was not involved in the creation at all. And you other question about the future of the 218 and...
I have a idea what it is but i can't do anything to fix it. Often the collision of the players pawn gets bigger or even smaller (when using the...
No idea. Those things are not even nearly connected to each other at all. Wipers can be only activated by the switches for them. I will check this...
I did not made the VirtualRailroads 218 for TSC. I left vR right (while developing) it.
The switch actually does work, but only when you switch off and on again the PZB after selecting the new mode.
That is what lots of other people might to miss, but it is there. That is the gearbox noise from the transmission output (Abtrieb).
Don't know what you mean. A video maybe, to get the idea?
That's is made this way to prevent phasing. If i make it audible for larger distances you get ugly phasing when two locos are near by each other....
The slow gear gives you 200kN max starting TE (falls down fast to 80kN at 50kph) and a speed of 100kph at max. The fast gear gives 160kN starting...
I have just read about it again in the documents for the 218 to get the idea what i missed with that, as it seems a few poeple mentioned it...
N-Wagen do have their own switches in each coach where you can set the coaches own lights or the whole train light. Not possible from the loco....
The HBK Dostos and the HBK 112 got an update to the door systems to the most recent version of it to work with the 218. That causes new problems...
That's just your assumption. Do you have real data to prove your assumption?
This is needed for triggering the brake objectives at the right spot. Just ignore it. It is set to not being displayed, but it displays anyways....
There are no trophies for single loco DLCs. Only the in-game rewards for using something or driving a specific distance.
Yes, it's there and is audible a bit more on cab 2 than cab 1. But i couldn't make it louder or it will distract a lot of people that are...
That's a KWS (KDS) one. The cab car doesn't care here as long as you drive from the loco. Changing ends is not possible with this then though. You...
Not possible. The original consist has one loco and the 218 subs in for this loco. That's it. You can't sub in 2 locos for one at the moment (and...
As said on a different thread, this type of gameplay is unwanted from my side, because of these problems and the door side thing, but i can't...
The suspension settings are vehicle dependent and it works on HBK too. It's just the rail joint gaps that are different on that older route and...
Parallax effect. The needle shows 5.0 exactly but from the perspective of the driver it looks less. Take a look from a perfect angle and you will...
Separate names with a comma.
