I was driving NJT service 3838 east bound from Trenton with the cab car leading. When I left Elizabeth the doors would not close so had to abort...
The patch did not change the display showing "clear 150". I ran it yesterday to again cross check the 2 motors.
I have noticed that the ACS 64 that comes with this route reacts differently than the one that comes with Boston Sprinter when they are run in...
One thing mentioned in last evenings stream was that Skyhook went with a 'feel' of the route not photo realism. So a lot of the building and like...
Don't know about the cross compatibility issue, but the 'q' key on pc's has always activated the alerter and AWS on UK routes and it also...
As noted in the video that I referenced, hold is only use when the train is under 25 mph, above that lap is the one to use when applying and...
Watch tis video for a very good set of instructions on how to utilize these brakes. (1) Train Sim World 3® NJ Transit Northeast Corridor Manual...
I used Boston route to learn ACES and ATC. The rules do actually transfer over to NY - Trenton, just that it is still not operaating properly as...
No problem OldVern, it was just an information post.
Did not see this in the thread, but Steam pre-order is now up at the usual 10% off.
Brandon, how would you go about doing this?
What I have found on the ACS 64 with ATC, you cannot clear the alarm until the train drops below the speed it wants with the signal. So any...
Looks to me that that the stuttering issue remains a UE issue as Matt has stated on a number. I would think that this limits us, the end user from...
This is a known bug with the neutral sections. My suggestion is when you see the neutral section warning sign, place the CPBC into off and leave...
I had the same problem on first start up after the patch. First time in a while its happened. The validation revealed on 1 file it had to...
This route is listed under the DTG heading not the second party one, so it is a DTG route.
Sad, it seems to be the old "fix one thing, break another".
I have to agree with the fact that is a fun route to drive. As far as the issues with the neutral zones, well, if you put the CPBC in power off at...
I do not know how many of you subscribe to the YouTube channel of this gentleman, but he is a beta tester and has an early version of the release...
I have noticed that since the last update which gave us Barndon's signal updates, the game logic that is supposed to tell the cars whether to open...
Oh, I will wait to see what people say about the patch, especially Brandon, who has already said the route is a mess as far as signaling and...
This one is a no buy until that patch is released.
Ran another east bound service 1R26. Must say a fun run with me starting to follow another train from Polmont all the way to Edinburgh. Again, the...
Just ran 1R22 and at both the Falkirk High and Haymarket neutral points this is the sequence of event. 1 On seeing the black neutral section...
SteveRail, I was planning on running an east bound today, so will do 1R22. Let you know results.
SteveRail, just did another west bound run, 1R59, and again the neutral sections worked as expected. I really am at a loss here as to why some...
I ran service 1R15 yesterday and the neutral sections worked as expected, so don't know if that last patch had anything to do with it. I need to...
This is why I have no intention of buying this route until its fixed.
Adding another run, 1R15. On this run both neutral sections worked as expected. The VCB light came on, the train lurched slightly since I had not...
Just ran service 1R43 west, and post today's patch I did not have any issues when in the neutral sections, but the circuit breaker open light did...
No you are not, that is one of the many signaling bugs this route currently has.
It is really a short route unless they do include the Blackpool South branch.
Which method did you use to display them? I enabled FPS using Steam, not the game itself. With Steam they are in the upper left corner and show up...
Andrew, I would add to your list the out bound stopping points at Haymarket, which did not get updated in the last patch like the in bound ones did.
Alright, I just ran service 1R23 out of Edinburgh twice to the first neutral section. Both times my train was in throttle 4 when I passed the sign...
Looking at all the posts, there seems to be no pattern as to whether you get power loss at the neutral sections or not.
Just did the east bound service 1R64 and did not have an issue at either of the neutral sections. As I posted earlier, west bound is another story.
From what I have seen in European cab ride videos, the driver of the train is alone, but when shunting is required a second, ground man is there...
Time to add another issue or 2, the update corrected the stop points at Haymarket for in bound trains to Edinburgh, but the ones for out bound...
Yes, I just noticed that today running service 1R44. Every time I passed one, the speed would drop at least 20 mph before I could recover. I just...
The wrong speed reduction to 80 mph before the bridge that is about 8.5 miles west of Haymarket was not fixed in the update. The speed sign...
Brandon, do you have access to the employee timetable, I believe that they do include an arrival time for the trains. The public tt usually only...
What I find hopeful, though slight, is a person like Brandon who does work for DTG, yet is not paid, continuing to work on the routes he has done...
Just ran a short service, 2N44, Alloa - Queen Street. I do not like the new brake settings. Using the pattern I had established before, I slowed...
OK guys and gals, has anyone verified that is mod runs with the new Rivet update? I have not had a chance yet to test it. Got to it sooner than...
Brandon, this is great. Using the Amtrak and MBTA timetables to come up with the in game one would be a great help. I also agree with the 2 minute...
Not sure what you mean here. I was going about 8 mph and 5 feet away from the stop circle when this happened.
I just completed service 2R19 on BCC and as I pulled into the last station I was ended just prior to the stop point and this is what came up, see...
Correct Crosstie, as I noted above, the difference is 6 minutes between what the actual timetable give for a full run and DTGs. I just ran MBTA...
Well, did get a gold on a morning commute, east bound, limited stop run from Providence. It ran non stop from Mansfield to Back Bay, but even with...
Separate names with a comma.
