So during my recent travels I have been thinking quite a lot on this topic - when using trams, U-Bahn, S-Bahn and trains in Vienna and when...
I'm having trouble with the NTP Rescue Run scenario in TSW4. Ran the 45 from Holbeck and coupled up to the 47 at Leeds OK, handbrake off on the...
As teased previously in the thread about calculating correct characteristics of freight trains, I was trying to create a calculator that would...
So firstly we have the issue where the headlights are on for both front and rear units. if you go to the rear unit to change the switch to tail...
Cannot depart from Strood because of brakes not releasing completely, tried to release the brakes on rear cab but not working
I think there is a bug with the RHTT where the train randomly puts on its emergency brakes for no reason, like i'm going too fast to a red light....
Hi, today when playing I encountered a weird issue - not a game / service breaking one, but nevertheless one I dont quite understand if it is a...
The (LT) brake button on the Xbox is registering I have pressed it but does not slow the train anymore?
I'm a bit concerned with a scenario in the Spirit of Steam journey called "Let off Some Steam" in which you drive a branch freight along the line...
Nahverkehr Dresden chemical Plant scenario, after reaching the chemical Plant sidings & you drop off your tankers with the 363, when you hook up...
Update Jun 29, 2022 - reuploaded new Global Tehachapi fix: includes correct couplers, brakes are fixed to properly release and not go into...
Hi all I'm using Rivets 363 and I don't know if it's me but when I'm connected to wagons I can never get the brakes to come off fully. I'll hook...
During the introduction tutorial for the 766.2 after one releases the brake there is a step to wait for the brakes to charge, this step does not...
I was driving a 6 x sd70ACe + 100 stack car train down a 1.5% grade. I had full dynamic brakes applied but it kept speeding up. I applied full...
Hello. The brakes on this loco need to be fixed. For example if I do a minimum application (6 psi) in the loco display everything seems fine at...
Hey there, following Adam‘s explanation in the roadmap stream (05.10.2021) as to the new focus of the preservation crew, I would like to suggest...
Brakes appear to have been changed in bakerloo since the update. Meaning that you’re constantly running late when using the above ground section...
I've tried searching but have not seen anyone else mention this. When you jump into the CTC-3C cab car and set up the brakes release uncommanded...
Hi all, yesterday I had the fortune of standing on a platform awaiting my train when a heavy iron ore train (the so called Erzbomber, that...
Got CRR last night & had a heap of fun driving the F7, lots of entertainment had shunting with it too! 1 - What's the difference with...
Playing through the second career scenario that came with the Tehachapi route (Hot Box Part 2), with the BNSF locos. On the downgrade over the...
Since DTG has already responded (on the forums) to my earlier feedback about the brake timing settings for German trains (and also fixed this for...
TLDR: I wish for DTG to implement a feature in the timetable service selection where players can modify each vehicle in the consist in terms of...
Hi, correct me if I'm wrong but the BR 112 breaks are way to soft. On 140km/h you almost need to do a full break when you get a vr0. Secondly the...
I already made a thread with my results of testing (primarily the brakes) on German passenger trains and locos in a previous thread in the...
I will structure my suggestion is the following way The basic premise of this suggestion. Why I would like to see this happen, and what it adds...
Is it just me, or do service brakes on the F7 just straight up not work?! Independent brakes work fine, but the service brakes do nothing and...
Just tried this one today. I've travelled from St Pancras to Ebbsfleet, everything working spot on, changed ends in the train, just go into the...
Does anyone else finds that whenever the Class 20 is loaded, the brakes are always off? You need to watch if you’re starting on an incline, or...
If you overcharge the brake pipe to get a faster release throughout the consist and then go back to the normal release or the neutral position the...
Hi there, as a response to a thread, I created a document featuring all markings I could find on German rolling stock, which are in some way...
I have trouble with the braking in the BR363. If you release the brakes often the brakes seem to be not totally off. The speed is reduced once the...
The brake cylinder gauge for the new CSX C40-8W on the HUD never goes to 0.0psi. Instead, it stays at 0.4-0.6psi when all brakes are released. The...
Got hold of this TSW 2020 DLC in the latest PSN sale for my PS4 Pro. I couldn't get past 'set brakes to release' step during the introduction to...
The HUD of the preserved GP9 and GP38-2 on Oakville seems to have a problem with the brakes. Whenever you release the brakes, the HUD tells you...
The preserved RRO intermodal cars have their brakes fully applied. Fully as in I needed to overcharge the brakes to the maximum for a long time...
Hello there! In the powering America part 1 scenario you are told to bail-off the brakes to release them. As far as I know, the bail-off position...
The brakes for the Talent 2 on TSW 2 seem just marginally better than having no brakes at all - even at 100% application. I don’t know if this is...
Hello, can I also brake with the ACS 64 with the electric brake combined with the locomotive brake? Because the automatic brake is too strong,...
The usual method of switching between direct brakes and driver's brakes (X button) doesn't seem to work. The only way to operate the direct brake...
So, I'm a little confused & a bit embarrassed 'cause Train Sim World is probably the number one game that I've been playing for almost two years....
Hi all, recently I was enjoying some switching with the BR 08 and noticed the brake mode change switch on the back panel. When I tried it out it...
Instead of getting a random percantage when applying and releasing brakes I'd like to be able to control braking in 5% or 10% increments.
So I was wondering...when you change cabins, what kind of brakes should you leave in release and what kind of brakes can you leave in full...
I started playing this game using the Great Western locomotives and the routes. I enjoyed this a lot. I decided to change things up and try the...
Can someone explain the difference in the braking system? When should I use direct and automatic brake?
Separate names with a comma.