I reported it before and even submitted a ticket. But at RSN you cannot reach the broken lamp at Oege Steel yard There a re a lot more issues with...
Hi, When a freight train passes me at the station, this makes a horrible noise. There is no way you can use your cell phone, you just need to...
I noticed that the level counting for achievements of the type reach level xx for loco/route yy is not working correct. E.g. for the class 31 in...
I almost always avoid Rotterdam because it has so many snap off points its pretty much unplayable. For my sins I decided to have a quick game....
I have seen at least two naming issues in the service time table. Services are NOT given the name of the destination, but of the start location,...
I did not get the achievement BR422 Lightweight Speed, both on HRR and RRO. Looking at the global stats, this is an exception. A fair number of...
The BR422 has the same issue the BR425 has: when you activate SIFA the Q key does not work. You need to stand up and sit down again, then it...
While running a service, in the BR422 (RRO) PZB put me back in restrictive mode after a station stop. When I pressed release, the in cab value for...
After 15.64 km driving the BR204, I received the Dedicated Shunter achievement. The text with the achievement says, drive the BR204 for 204 km....
[ATTACH] [ATTACH] There is still a stupid bug in the Hafenbahn area (MSB, BR204). at a switch the speed limit is 4km/h where it should be 40 km/h...
For German engines, when braking you need to set the throttle in Off position. When the brakes are released, the throttle should be unlocked...
In the shutdown procedure you need to set the reverser in the Engine Only position, not in the Reverser Off position, even though the instruction...
Hi, I played the U876B service and tried to set up slow speed control. The train has two AC4400CW engines at the front, no banking engine at the...
Hi, For service 1P51 at GWE when arriving in Paddington you need to open the doors at the wrong side.
In the Aggregate Industries scenario, the first action is to set up slow speed mode in the EM2000 display. You are instructed to press the select...
I played Powering America part 2. I saved the game while driving. When I tried to resume the game next day, the AC4400CW would not run any more....
During timetable drive 2D70 I noticed during the stop in Brading that passengers leave the train at the track side. The doors open at the correct...
For the class 09 I did the tutorial and one scenario. My achevements list says I used the horn 56 times. I do not believe this is correct. So it...
Hi, During the tutorial for the Class166 (GWE) you need to set the head lights to day. For some reason, this setting is not available, not using...
Driving with PZB and LZB on, I was braking to late near the end of the LZB section. An emergency brake procedure occurred. At the end of this...
The physics for the class 43 have changed somehow. In TSW2020 you needde to set the throttle back to notch2/3 to prevent overspeeding. In TSW2 I...
At the WSR routes near Dunster, the clouds are rendered in front of the electricity wires. A bit annoying [ATTACH]
II noticed that shortly after the LZB section starts in the wipers stopped working. Nothing worked to get them working again.This may be...
[ATTACH] The Wash and Go scenario is just after the BR423 introduction. However, in this scenario you drive the ICE, which is introduced in the...
At TSW2 the class 31 is not available in the WSR timetable. It was there in TSW20202
For the U876 the third service is named U876B instead of U876C as in TSW2020. It is minor issue, but should be easy to fix (hopefully). [ATTACH]
Now I have an accelerometer MOD, which is a great improvement, I noticed that when driving backward, if your speed increases the accelerometer...
In TSW2020 the windmills at Sandpatch would turn only if you set a weather condition with wind. This function is no longer working in TSW2. The...
Hi, I had the auto-laod journey turned on (not intentionally), did something stupid afer 40 minutes driving at the SFJ route, where as reported...
There are some issues with the co-operation of keyboard, mouse and XBOX controller. The worst is: Sometimes the game does not notice when you...
A minor one, there is a typo in the FIS function of the function display. The text says "hock" instead of "hoch" [ATTACH]
At the SKA route, in at least one case the signal aspect in the HUD is shown as green, instead of yellow. I have seen this issue before in TSW2020...
[ATTACH] For the BR155, when I apply the train brakes, the brake input values are not shown in the Speedometer HUD. The output values are shown...
I played the Sandpatch service Y106, which has the word Refuelling in its instructions. As you can see below, it misses the order to refuel. By...
The class 377 DRA does not block you from applying traction.
In the scenario planner, TVL I created a scenario form Darlington to Red care Mineral terminal. Consist is 2x Cl37 + 24 empty coal hoppers. The...
For TVL, if you select a start location, the location should be highlighted at the map. For South Bank this is not working. I had problems with...
I just played the SD40-2 introduction. As I am an experienced player, this is not really needed, but it is in the journey... I felt disappointed...
This is not a big deal, but this type of issue should be avoided. I drive from Shaw Mine to Garret Siding with a long train. At Garret Siding the...
If you run a scenario using the path Düren Platform 5- Köln Hbf Platform 10 (S-Bahn service), you have to open the doors in Köln Hbf at the wrong...
A small issue. The HUD keeps showing the throttle as locked, even when you can apply power. This happens in the Tutorial GP38-2 introduction,...
This may be a bug or not. In all communication I have seen, the tool to create scenarios is called "Scenario Planner" In game it is called...
Playing a nice drive at Sandpatch, I used external camera 2, when the train entered the tunnel between Hyndman and Mance. The camera kept hanging...
It happens far too often that TSW2 forgets my login credentials. It happens often when there are updates, news items etcetera but it is not...
This is an old issue. If you use camera 2 and you move between the front and rear of the train, the containers change colour. Also I noticed, that...
Trains coming from Rockwood main, have a path to Cumberland Receiving Yard track 3. This is strange location to end a train. It is designed to...
I just created my first scenario for Sandpatch, starting of at Hyndman track 02 heading for Cumberland. The Speedometer HUD shows a speed limit of...
Several issues with the Scenario Planner: 1. If you place a train in Lewes it is heading to Brighton, not to Seaford 2. In Lewes the player train...
At several locations, you need to open the doors at the side that is not adjacent to the platform. An example is ECL, drive from Brighton, stop at...
Immediately after release I created a scenario (very simple) with the Scenario Planner. It worked. Yesterday and to day I created a few others,...
Separate names with a comma.