Epic Games Db Br 294 Ezk (53383) Weissig To Riesa Rbf - Part 2 Journey Fix

Discussion in 'TSW Troubleshooting & Issues Discussion' started by TheVorch, Jun 2, 2026 at 7:43 PM.

  1. TheVorch

    TheVorch New Member

    Joined:
    Tuesday
    Messages:
    1
    Likes Received:
    0
    For PC players only if you are trying to get 100% journey completion in Bahnstrecke Leipzig – Dresden for DB BR 294 in TSW 6. The EZK (53383) Weissig to Riesa Rbf - Part 2 mission is broken and triggers a SPAD as soon as it loads in and there does not seem to be a fix in the works as of June 2026.

    1. Install Foobian's God Mode (https://www.trainsimcommunity.com/mods/c3-train-sim-world/c75-utilities/i2703-tsw-god-mode-alpha-066)
    2. Load the mission in journey mode.
    3. At the start screen, click to start journey and immediately hit Esc, then Save (you have to be quick, it's bringing up the SPAD failure screen as you are doing this).
    4. Go back to main menu and load the saved journey.
    5. You will now be loaded into the mission without the SPAD but with the route deleted so you can't complete it by driving.
    6. Move mouse to the top right corner, click the >_ icon to bring up God Mode command line
    7. Enter ts2.dbg.ShowObjectiveUI, click the => arrow, you should see Objective interface pop up on the right.
    8. Click Complete Action. Flow 0 in the top right corner should turn green.
    9. Click Save Game. Click Load Game.
    10. When the game reloads, you will still be in Part 2 of the journey but with Part 3 objectives. Repeat steps 6 and 7 to bring up the Objective UI again. Click Complete Action three times, it will finish all objectives and complete the mission with Platinum result.
    11. I imagine this would work for any broken mission but I haven't tried it in others.
     
    • Helpful Helpful x 1

Share This Page