Route Art Help Lidar Data Beeing Applied Strangly

Discussion in 'PC Editor Discussion' started by etcslvzwei#2051, May 31, 2026 at 8:50 PM.

  1. etcslvzwei#2051

    etcslvzwei#2051 New Member

    Joined:
    Yesterday
    Messages:
    1
    Likes Received:
    0
    Hello,
    I have probably made a mistake in the Import Lidar data Process. The result is strange leveled Lidar Data on diffrent heights like many big cubes beeing at the same time detailed in there height: Screenshot 2026-05-31 173457.jpg
    The yellow selection shows the tiles which are not aligned:
    Screenshot 2026-05-31 174738.jpg

    The process:
    DGM 25 or DGM 1 from Baden Würtemberg.

    Merged to big tiff, then Tiled into smaller tiffs.

    Tiffs converted to ASC with "gdal_translate" .

    I imported the ASC back into Qgis to very the georeferencing, the big tile is the Merged and the small tiles the reimported ASC files:
    Screenshot 2026-05-31 205635.jpg

    In the Editor the process as normal creating tiles with the HGT(SRTM-Data) and secondly the applying the ASC (LIDAR-Data).

    In hope that somebody knows how to fix it EtcsLv2.
    PS: I have successfully generated the Marburg Map from the Masterclass stream. This was the trying again by myself to learn way which failed.


    Image test: Screenshot 2026-05-31 205635.jpg
     

Share This Page