1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help With Pzb Safety System

Discussion in 'General Discussion' started by Omenanraato, Jul 29, 2018.

  1. Omenanraato

    Omenanraato Member

    Joined:
    Jul 25, 2018
    Messages:
    42
    Likes Received:
    16
    Why the train stopped. The lights were green, so what did I do wrong? Why did the safety system stop the train? How do you know you can not go over 45km / h? And why was the train stopping again at a slower speed when accelerating again?

    (Train stop after I leaving station in 2:20)
     
  2. Kevvy68

    Kevvy68 Member

    Joined:
    Jul 25, 2018
    Messages:
    40
    Likes Received:
    14
    Did you accidentally nudge the reverser in exterior view mode ?
     
  3. Omenanraato

    Omenanraato Member

    Joined:
    Jul 25, 2018
    Messages:
    42
    Likes Received:
    16
    I was in a cockpit view full time, as the video can see.
     
  4. Kevvy68

    Kevvy68 Member

    Joined:
    Jul 25, 2018
    Messages:
    40
    Likes Received:
    14
    Ahh ok...i didn't see the video at first.
     
  5. ITRail

    ITRail Member

    Joined:
    Feb 27, 2018
    Messages:
    36
    Likes Received:
    54
    never happened to me, mbe is a pzb system bug
     
  6. Omenanraato

    Omenanraato Member

    Joined:
    Jul 25, 2018
    Messages:
    42
    Likes Received:
    16
    Or I do something wrong. :D
     
  7. xD 2Bad4You

    xD 2Bad4You Well-Known Member

    Joined:
    Mar 10, 2018
    Messages:
    920
    Likes Received:
    709
    I´m not a pzb expert, learned and still learning the system, but there isnt any reason imo this to happen. Aspects were green, so the 500HZ influence seemed to come out of nowhere.
    Sadly the whole system isnt implemented 100% right in RT, several bug reports from the PC side that arent still fixed and carried over to the Console Version now.
    We have to hope they fixed it for Ruhr Sieg line and will apply that fix to RT aswell.

    If i´m wrong, someone correct me :)
     
    • Upvote Upvote x 3
  8. Omenanraato

    Omenanraato Member

    Joined:
    Jul 25, 2018
    Messages:
    42
    Likes Received:
    16
    I wondered that too. I did not have 1000hz impact area, so how did the 500hz icon come on the screen? I did not have time to react, so the emergency brakes immediately went on. And why did the train stop immediately again?
     
  9. SamYeager270

    SamYeager270 Well-Known Member

    Joined:
    Dec 8, 2016
    Messages:
    449
    Likes Received:
    394
    You may find this thread helpful.
     
  10. Scarface

    Scarface Member

    Joined:
    Jul 18, 2018
    Messages:
    35
    Likes Received:
    59
    Hi,
    Iam not an expert and my english is not the best, but i think this Signal is fals (should be red).
    [​IMG]
    you have to "Request to pass" and holding PZB/Befehl while the train is passing:

     

Share This Page