Route Riviera Line: Exeter – Plymouth & Paignton (incl. Class 150 & 802) - Feedback

DTG Harry This is from a Steam dl today.

 

150 on PS5 for me, not sure about the 220.

The 150 had the engine stalls three times while sat at Exeter St Davids.

 

Hi DTG Harry, I've just completed a 220 run from Paignton to Manchester Piccadilly (1M41). I had about 10 engine stalls before Newton Abbot and probably around 20 overall, but I gave up counting at some point. I'm on Steam and the build number is 527.

 

So this evening I ran 2C69 in the 4 car HST on the PS5. During the run there was a 40mph TSR but despite have AWS on I didn't get an alarm. So it's not clear yet that feature has been implemented properly.

 

Currently driving 1C50 Paddington to Penzance (The Night Riviera), coming up to a 40mph TSR, passed the yellow warning sign but no AWS activation despite safety systems being on.

PS5

 

Yes it’s no good just having the magnets appear visually, they need to interact with the train too!

 

Seems since the latest update all the ai is running with reds on the front, definitely on the 150 and the 220 so far. Also affecting the hst, this is on pc

 

Update has done this to my journey now .

 

When saving the game, leaving and then returning, all 150s appear as 150215, so any 4-car services are somewhat ruined.

Additionally, though this may be a core TSW6 issue, the textures are terrible on Xbox Series S; the textures go blurry and low quality usually at Newton Abbot, Teignmouth or somewhere between those two stations.. and stay like that for the rest of the game. The only fix is to save, leave and then reload the save - but with the 150 issue mentioned above, that isn't always too good of an option....

 

I think this is because of the Hill Start, which toggles on this train. So DTG you can discard this for me.

 

I believe that this is directly related to these changes in Friday's patch:

- Changed duplicated service 2E29 to 5P31.
- Changed duplicated service 2C04 to 2T08 in Journey Mode.

You'll have to complete those two services again, but the medals will stay after that.

 

looks like faults are fixed... tho I encountered a strange thing with HST (1U20 or sth, from Plymouth)... tried lower notches first, then higher ones, and at some points it seemed the engine completely shut down, cos I was rolling backwards even on max notch... restarted it like 2x, third time everything worked as intended ... so dunno if I managed to press some key without noticing, or the game just bugged for a bit (had faults on and fault notif. on)

 

150 continually stalling on PS4

 

[ZITAT="DTG Harry, Beitrag: 1051536, Mitglied: 48527"]Kann ich nur bestätigen:
Treten bei beiden Modellen, 220 und 150, immer wieder Störungen auf?

Wenn ja, auf welchen Plattformen wird das angezeigt?[/QUOTE]
Hey, Ps5

 

The update has caused an issue with the doors randomly not locking on the 150. With train faults turned off, a door may still remain open by error randomly. However, once it's closed you are unable to reopen or lock any doors, and it shows on the hud that the doors are open even when they are shut. It's a fault that stops the game as you can no longer continue. Very irritating. I'm not sure what the update actually fixed, but I'd happily go back to the previous build!

 

This is the same with the 802 and 220. When loading in, the 802 becomes 802 234 and the 220 becomes 220 000

 

I had this last night with faults turned off too. Had to manually open every door and close them again

 

It's a pain. I gave up and ended the game. Probably not the greatest of ideas for DTG to push an update through on a Friday afternoon knowing, that if there are problems, they cannot be addressed until the following week.

 

Ah good to know, I haven't actually used the 802 yet and hadn't noticed the issue with the 220.. cheers for that!
Hopefully it'll get sorted soon - it's a very annoying issue

 

Gauge light problem, Class 150. Although the dials illuminate properly, the needles do not- making them useless in the dark

 

There’s a bug in the scoring system on the Riveria Line in TSW 6.

I drove Flying Scotsman on the Cathedrals Express - Part 1 timetable service (with signalling systems on) and arrived at Plymouth on time, receiving the maximum 240 AP added to my current score for timing and stopping accuracy. However, after finishing loading the passengers, I only got 176 AP (eight 22 APs) added on to my score instead of the usual 250 AP (like I got at Exeter). Please fix this.

Platform: Xbox Series X.
Service: Cathedrals Express - Part 1.
Repeatability: The bug occurs every time. I have replayed the timetable service a few times.

 

What is going off with the 150/2 on Xbox series x on Paignton to Exeter route 150/2 wipers suddenly stop and engine suddenly all cut out at once and yes whilst having random faults enabled no longer get warnings at so I feel this is faulty as never before do you leave Dawlish doing only 10 mph only to have all engines complete die and still light up engine start button

 

Reading through the various feedback threads, I feel that intentionally adding bugs to a game as riddled with bugs as TSW already was, may not have been the best of ideas.

 

just noticed that the HST 4car (aka 6car) needs notch 4 to get moving, even on like 0.4% incline, which is weird, since I dont know about any antiroll brakes on this unit...

edit: alright... looks like I am dumb and it was the brakes taking their sweet tea time to release lol... will see upon doing more runs

 

Just had my first timetable issue.

Platform: PC / Steam

Service: 2T18 1223 Exmouth (1300 Exeter) to Paignton

Weather/Time: Custom, 13th October.

Player service: Class 166.

Issue: Held at a red signal outside of the timetables stop at Newton Abbot P1, as service in front - 2T17 says service off path. Once I was able to delete the path and train, the signal cleared letting me complete the service.

Have played around 20 services now on Riviera Line and first time I’ve come across an issue.

 

Also, any TSRs seem to be in the same place, yeah it's random if they are there but when they are, it's always in the same place. No variations in locations

 

Yes the 150/2 repeated engine shutdowns and full ones at that train suddenly dies with no warnings indicating faults and wipers suddenly stop working and as soon as you reset engines they all repeatedly die and this is Xbox series x