PC Sifa Kills Power On Loco After Update 28 Oct

With the latest update today, when SIFA lights up the power is killed on the loco (before I even have a chance to ack). When SIFA is activated (Shift-Enter) and every SIFA prompt comes up power is lost to the loco. RE80 11454 Hamburg - Luebeck BR146.2 timetable Oct 26 date clear weather. Worked fine before the update. This was selecting the BR146.2 from Kassel Wurzburg. I picked a the same train from another route (will verify) and it didn't happen.



Ticket #50776 SIFA triggers power loss

 

Seems the issues just never end...one thing fixed and now two more broken....
Where is the QA department?

 

Has it been the same on other routes?

 

I was able to reproduce the issue with the 146.2 from Schnellfahrstrecke Kassel-Würzburg, this 146.2 and all other red KWG trains are,
according to Matt's statement, intended for AI traffic on KWG. The only exception is the 185.2 for freight trains.

The other two 146.2 from Main-Spessart Bahn and Nahverkehr Dresden work without problems, so if you want to complete the service with the 146.2, you should use one of these, provided you have MSB and/or DRA. Otherwise you have to use the 112.1 from Hauptstrecke Hamburg-Lübeck.

 

I had this issue with the NTP Class 47 when acknowledging AWS with the controller (PS4) whilst driving on SEHS. It acknowleged the signal, but also cut the power. I had to throtte off and back up to resume.

 

Seems to be another major widespread issue

 

Any news from DTG about this? DTG Benjamin