Tees Valley Line Class 101 Tutorial Cannot Complete

Discussion in 'Troubleshooting' started by Peter Hayes, Sep 26, 2019.

  1. Peter Hayes

    Peter Hayes Well-Known Member

    Joined:
    Dec 9, 2016
    Messages:
    787
    Likes Received:
    318
    I may have missed posts on this (Class 101 tutorial) but after setting up the rear cab you are instructed to walk to the front of the train to set up the drivers cab. However, you are instructed to walk only a certain distance which stops you in the middle of the train - with no task I could find to perform. If you walk to the front cab you can't get in to set it up ie the door won't open and the indicator thingy is aking you to walk back several yards to the middle of the train. How do yo get this tutorial to work? Why are we stopped in the middle of the train when we are originally asked to proceed to the driver's cab?
    Thanks
    pH
     
  2. kalteVollmilch

    kalteVollmilch Well-Known Member

    Joined:
    Jun 13, 2018
    Messages:
    229
    Likes Received:
    440
    Sounds like you are leaving the train and walking along on the outside. Try walking through the train without exiting it first and see if this helps
     
  3. Peter Hayes

    Peter Hayes Well-Known Member

    Joined:
    Dec 9, 2016
    Messages:
    787
    Likes Received:
    318
    KV
    Many thanks - that was what I was doing. Not really clear in the instructions. Now completed thanks to you!
    pH
     

Share This Page