PC Ts World Raildriver And Joystick Interface

Alright, do you use any mods? bc if not it could be that causing the issues for me, or could be some sort of computer issue potentially but not sure since it only started after using the raildriver, I'm not blaming it on his product I think its great, but maybe the raildriver program alongside the mods is causing some sort of issue so I'm asking if its likely that or not.

 

i am using a lot of mods

maybe you have some raildriver mods installed like
RailDriver Reconfiguration Mod - US Locomotives - Train Sim Community

just keep checking for mod updates

 

Just tried driving a service without the raildriver and same issue happened, so it's probably something wrong with my PC or something with TSW, although was happening only towards the end of TSW5 and only after I got the raildriver which is strange, I definitely don't have any mods to do with the raildriver so can't be that, and I installed all my TSW6 mods around 2 or 3 days ago and same issue was happening before I got my mods so it's really strange.

 

the mod that made TSW 6 crash here was tmSpikeesCabCamFixesTSW5.pak

 

I don't have that mod but I did on TSW5, maybe that was the issue on TSW5 but I had it since it released so not sure.

 

I'm having the same issue. Where did you go to recover these files?

Nevermind I figured it out.

 

TSW Raildriver & Joystick Interface V2.0.1.5 released.

This update is for Steam users only.
This version will look for previous Raildriver.ini files and automatically copy the last one over to the current version of TSW.
What this means is, if you have TSW 5 installed with a Raildriver.ini, it will be copied over to TSW 6 for you. Epic games & Xbox for windows users will still have to do a manual copy.

Download from: https://www.dropbox.com/scl/fi/udch...ey=7z3fa01yyihaw17c0owixdba9&st=uveewpdi&dl=1
Chris

 

First of all, make a backup copy of your current version,
Then download V2.0.1.5 above and extract it to your current version overwritting existing files.
Next, navigate to Documents\My Games\TrainSimWorld6\Saved\Config\WindowsNoEditor and delete the Raildriver.ini file.
Now run V2.0.1.5 and it will copy the Raildriver.ini from your previous version of TSW to your TSW 6 folder and copy the correct PieHid64.dll to TSW.
Chris

 

TSW 6 Free Version - TSW Unniversal Controller Interface

TSW 6 now has a api that allows programmers to talk directly to TSW without using the PieHid64.dll, but instead use HTTP requests.
With the api, I can also extract the notches used on the levers in each loco which should give much better control of the levers
I am working on a new version of my program (TSW Unniversal Controller Interface) that will talk to this api but there is a learning curve for me to do this, so it may take some time to come up with a viable solution and there is no guarantee I will be able to achieve this.
In the meantime, the current version will remain working for the foreseeable future.

As this will only work with TSW 6 onwards can I recommend users who do not have TSW 6, to get the free version asap. The option to get the free version expires on 11/11/2025. You just need to claim it, you don't have to install it straight away.

Chris

 

That sounds amazing thanks Chris, best of luck developing the new software.

 

http request i am pretty sure are working in TSW 5 too

 

It is working for TSW 5 but not for the Raildriver. There is a command in the api to turn off the PieHid64.dll but that is not in the TSW 5 version of the api so the raildriver will continue to use the dll.
Chris

 

ah so thus it has improved

 

Since Train Sim World 6 is now upon us, for anyone that uses RailDriver and would like to have a better playing experience alongside using the Raildriver & Joystick interface, I have updated and overhauled my RailDriver Reconfiguration Mod for US Locomotives over the weekend on the Train Sim Community website.

Among reconfiguring several button and lever inputs that I have previously implemented, I have also implemented deadzones on all throttle notches on most locomotives (which mostly prevents notch slipping, as well as unintended dynamic brake setups), improved upon the existing reconfigured deadzones and curves on all other RailDriver levers such as the Reverser, Auto-Brake, and Independent Brake, as well as implemented functionality for the 28 function keys on all locomotives.

I have included support for the recent Morristown DLC (including the Arrow III's which had god-awful RailDriver throttle implementation that has since been fixed with my mod), as well as the Training Center SD40-2, and the Holiday Express F7, and also adds RailDriver support to the Metrolink Holiday Express DLC (which did not contain RailDriver support upon release, though you will need either Antelope Valley, or San Bernardino for it to work). There is an extremely big, but extremely helpful spreadsheet that I have provided which has all of the new and existing inputs that I have configured on each locomotive for this mod, it is recommended to take a look at said spreadsheet in case I need to update my mod.

You are able to use these mods alongside CobraOne's RailDriver & Joystick Interface, as this mod will work really well with the program. Keep in mind, these mods were created with the RailDriver controller in mind, I do not know how well these mods will work with the TSC-X controller as I do not own the TSC-X, only the RailDriver controller.

US Locomotives (Updated as of 10/3/25): https://www.trainsimcommunity.com/m...ail-driver-reconfiguration-mod-us-locomotives

I have also uploaded a different version of this mod a while back, this time for several of the European Locomotives. Note that this mod is slightly outdated, as I have yet to reconfigure the function keys on the associated locomotives, though you are still able to use it in TSW6. It will be updated in due time.

European Locomotives (Outdated, will be updated eventually): https://www.trainsimcommunity.com/m...iguration-mods-european-passenger-locomotives

Once again, thank you CobraOne for the hard work you have put into the RailDriver And Joystick interface, as well as your contributions and fixes to this small TSW community of us RailDriver users.

 

Apologies for not getting to this reply sooner, as this mod had eaten up a lot of time on my hands.

Please see the above post regarding an updated version of my RailDriver Reconfiguration Mod. Hopefully, you won't be disappointed

 

This is excellent news the API will make this much less fiddly install because most people I help via the channel have failed to get the DLL copied over properly. The API is definitely also in TSW5 although it was slightly different but for the most part should be the same. I assume you'll be using the Virtual Raildriver part of the API otherwise you'd need specific calls for every kind of locomotive. You will also be able to get telemetry and the like.

Be careful with the notch idea as it ranges between infinitely variable such as a steam engine regulator, 3 notch, 5 notch, 8 notch, 11 notch, 33 notch (tap changers).

Thank you on behalf of myself and the community of people who use this.

Paul

 

THANK YOU! The Arrow is so fun to drive now! Also, the deadzones in the other locos make it so much better not going from notch 1 to brake 1 accidentally. I really appreciate your contributions!

Eddie

 

Regarding your mod PrimeMoverSimulator
did one service run with the arrow
and i have the TSC-X controller
and had no problems
will soon test more US trains

 

Not sure yet as I haven't tried it.

I have been using CurrentDrivableActor to create a lever map file for each loco.

I have managed to extract the notches (if the loco has any) assigned in each loco, also each levers min/max values which should help improve accuracy of the controls.
Chris

 

Hi, i built my own raildriver and everything works as expected and i am in the last testing stage.
Altough the Vectron 193 is giving me problems. It has 3 levers ingame (AFB, ThrottleAndBrake and TrainBrake)

I cant seem to find the right lever map for this kind of train because when i assign my lever to LocoBreak for AFB like always it doenst work it turns the Direct Brake in the Train not the AFB is there a solution to this?

Elyes

 

Hi guys. How do I add the "BailOff" position to this list?

 

I have stopped using CobraOne's interface since moving over to TSW6. The only problem I have encountered is the 150 on Riveria. I have even gone back to TSW5 routes via TSW6 and they no longer give the jittering we saw in TSW5.
Now, for me, the 150 is a total mess, even from the keyboard. The reverser seems to have a mind of its own. It won't stay in forward when using the Rail Driver and not always even from keyboard input. Further, when putting the throttle into the off position, the reverser goes into neutral, causing the brakes to apply. I have calibrated it several times.

 

so congratulations, your raildriver is working without any problems..i still can't get the levers to move properly..they keep oscillating..in tsw 4 it's no problem..the problem is in tsw 5 and tsw 6

 

I have just tried the Vectron 193 using the original PieHid64.dll that comes with TSW and although, according to the settings for the Vectron, the AFB is assigned to the Loco/Ind brake, moving the Raildriver lever does not move the AFB lever in the cab.
This is not something I can fix using my program.

Having said that, I have just tried moving the AFB using the new API using the CurrentDrivableActor command and it does indeed move the lever in the cab.
I am working on my new version that will use the new API as fast as I can, but won't commit to a timescale at the moment or guarantee that it will be completed, but it is looking good at the moment.
Chris

EDIT: Just to confirm my suspicion re the AFB, I have just tried using the VirtualRaiildriver in the API and again moving the Ind Brake in the API did not move the AFB in the Vectron.

 

You can't, it is assigned in the Master Lever Map :


and can only be used as the BailOff. The reason being, on the Raildriver the BailOff is activaved by moving the Independant brake to the right. It's more of a switch rather than a lever.
Chris

 

Hey everyone,

could someone please explain how to get the program working with the BR 101 Expert version? It works perfectly fine with all other locomotives, but not with the Expert 101. I can’t figure out what I’m doing wrong here!

Thanks in advance!

 

Thank you very much for your reply, so i need to wait until you release a newer version if i understood that right?

Elyes

 

Well, totally uninstalled, then reinstalled latest version and works great again. Solved the 150 issues so I can run it with my Rail Driver.

 

Is there a way to fix the Morristown ALP-45, ALP-46, and cab car throttle not letting you put it at 0, and jumping straight to dynamic braking?

 

I do not remember have this problem but will check tomorrow.

 

In such cases, I adjust the notches so that the center (0.500) is expanded to a range that covers this error.

 

Hi all.
Once again I have made some single axis joystick units for those wanting to build their own Sim controller.
Available on eBay:
Single axis joy stick(s) for you DIY home sim. 3D printed proven design. | eBay UK


As used on my set-up.

 

Hi jannie#6483

Your item on eBay states that you do not ship to Switzerland.

Could I buy 1 or 2 controllers directly from you and pay via PayPal, with shipping to Switzerland?

Feel free to send me a private message about this.

 

Thanks for your response. We have tried assigning the lever to LocoBrake and testing with the ÖBB1116. Unfortunatly, on this train the LocoBrake does indeed control said brake. So no chance using that trick. Any other advice?

We also couldn't find a good asset setting for the Kombihebel. Either it didnt work at all or it also did the train brake (instead of starting at 0 and going up).

We are still hoping to get these levers working for 5 (and 6)!

 

In a word, Yes. Unless the creator of the content fixes the problem first.
Chris

 

In the Master Lever Map, have you
1. Set the ThrottleAndBrake and Throttle to use the same lever.
2. When assigning the Throttle, did you say Yes to using the whole lever as the throttle.
3. Set a separate lever for the DynamicBrake.
4. Selected the ThrottleAndDynamic as the Enabled Asset
Doing this made the 1116 work fine for me.

Regarding the AFB, it can only be controlled by the 'F' and 'R' keys in the 1116, so you will need to assign buttons to the following.
Cruise Control Increase KEY_R
Cruise Control Decrease KEY_F
Chris

 

You can also edit the Raildriver.ini file located in Documents\My Games\TrainSimWorld6\Saved\Config\WindowsNoEditor\.
Look for the ControlIndex=1,CalibrationPointValues=(0.000000,0.480000,0.520000,1.000000) and decrease the 0.480000 to 0.450000 and increase the 0.520000 to 0.550000 This will increase the neutral gap in the middle of the lever.
Chris

 

HI CobraOne

I used your software I have an old version TSW Raildriver And Joystick Interface V2.0.0.8 I used on TSW5.
Today I launch this version with RSW6 and it works excactly like my TSW5.
I decided to download the last version V2.0.1.5
I do not see differences
QUESTION 1-Concerning the Direct brake or Loco brake the small lever placed on the right near the Door Pusbutton it seems that
LeftBracket does not move the lever?
I use as TSW5 in TSW6 the Semicolon key not LeftBracket and it works perfectly.
But I am in AZERTY keyboard I do not change it to Qwerty.
QUESTION 2-About this file PIEHid64Net.dll I do not have RailDriver but I used my Joystcik Thrustmaster Warhog and Logitech for levers.
So I copy your file located here C:\TSW Raildriver And Joystick Interface V2.0.0.8\PIEHid64Net.dll and replace in TSW5/TSW6 located here C:\Steam\steamapps\common\Train Sim World 6\WindowsNoEditor\TS2Prototype\Binaries\ThirdParty\PieHid\Binaries\PIEHid64Net.dll
All works but is it the right method because with new update perhaps it is not necessary?

Many thanks for this nice software
Regards from France

 

Hi, I managed to fix my other issues but I have an issue when using the throttle option, when using it on the class 153 and 150, when in the position that should be 'off', instead its at throttle 5, so I can not put the throttle into idle at all, no idea why because no other trains have this issue and its only the trains from the cardiff city network route, it works fine using my keyboard but not with the raildriver, hope that makes sense and hopefully you can help.